Overview
The RC4WD Trail Finder 2 Truck Kit with 1982 Toyota Pickup Body Set (Z-K0070) is a premium 1/10 scale rock crawler designed for enthusiasts who demand authentic scale appearance combined with trail-ready durability. This is not a ready-to-run RC car; instead, it's a sophisticated kit that requires approximately 2-3 hours of assembly, making it ideal for experienced builders and dedicated hobbyists who appreciate the craftsmanship involved in creating a truly custom off-road machine. Whether you're searching for a high-performance RC crawler UK or a showcase-quality scale model, the Trail Finder 2 delivers on both fronts with its meticulously engineered billet aluminium chassis, cast axles, and the iconic 1982 Toyota pickup body that captures the timeless appeal of classic truck design.
Built around a precision-engineered platform, the Trail Finder 2 is fully compatible with an extensive range of upgradeable parts, allowing you to fine-tune performance and enhance its lifelike scale appearance over time. From upgraded drivetrains to detailed body accessories, this RC crawler offers endless possibilities to make it truly yours. Whether you're chasing peak performance on challenging terrain or crafting a head-turning scale masterpiece for display, the Trail Finder 2 grows with your off-road ambitions. This is an electric RC truck that rewards patience during the build process with exceptional handling characteristics and authentic styling that turns heads at any RC gathering.
The inclusion of the hard 1982 Toyota pickup body set sets this kit apart from generic crawler platforms. The body features a functional hood, moulded dropped bed for scale accessories, bolt-on scale cab back for truggy-style builds, side sliders, and both front and rear tube bumpers. The front winch bumper includes an integrated mount ready for an optional RC4WD winch, making this truck a genuine multi-purpose platform. Unleash your creativity, conquer the terrain, and experience the freedom of a truck that's as adaptable as your wildest adventures.
Key Features
- Billet Aluminium Ladder Frame Chassis — The Trail Finder 2 features a machined billet aluminium ladder frame with integrated leaf springs and scale shock hoops, delivering the classic handling and stance of a real pickup truck while providing the rigidity needed for demanding trail conditions.
- R3 Scale Single-Speed Transmission — This transmission comes with a tough cast metal case, wider steel gears, and a Delrin spur with slipper clutch for reliable performance. The billet aluminium adjustable motor mount offers multiple positions for fine-tuning setup and is compatible with spur gears from Axial, Traxxas, and Robinson for extensive customisation options.
- Hammer Transfer Case — Center-mounted with cast casing and heavy-duty widened 0.8 Mod gears featuring 8 bearings and hardened steel, this transfer case ensures lasting functionality and the capability to handle day-after-day trail use without compromise.
- Yota II Ultimate Scale Cast Axles (XVD) — These are the most scale-accurate axles on the market, featuring 8-degree round knuckles, removable differential covers, lower mounting points, and a compact offset pumpkin. Designed for versatility, they accommodate leaf springs in both over-axle and under-axle configurations, eliminating the need to flip the axle.
- Metal Driveshafts with Uni-Joints — Durable metal driveshafts featuring heavy-duty uni-joint construction provide improved driveline angles and exceptional durability, ensuring reliable power delivery over rough terrain.
- Ultimate Scale Shocks with Internal Springs — Rebuildable shocks measuring 60/80mm are machined from billet aluminium and feature an internal spring design with X-ring sealing technology, providing multiple sealing points for superior protection against leaks and contamination, ensuring cleaner operation and longer performance life.
- Stamped Steel Beadlock Wheels — 1.7" SR5 beadlock wheels in chrome finish with proportional hex bolts, hubs, and printed wheel caps deliver authentic scale looks whilst maintaining structural integrity for serious trail work.
- BFGoodrich All Terrain KO2 Scale Tyres — 1.7" tyres in X2S3 compound provide proper traction and authentic scale appearance, replicating the real-world performance characteristics of these legendary off-road tyres.
- 1982 Toyota Pickup Hard Body Set — The hard body features a functional hood, moulded dropped bed ideal for scale accessories, bolt-on scale-accurate moulded cab back (perfect for truggy-style builds), rock rails, front winch bumper with integrated winch mount, and rear tube bumper. This body captures the timeless design and retro charm of the original 1982 Toyota, making it a favourite for collectors and modification enthusiasts.
- Marlin Crawler Bumpers and Sliders — The front winch bumper with stinger and side plastic sliders V2 provide authentic crawler aesthetics whilst offering functional protection, whilst the rear plastic tube bumper adds durability and scale realism.
- Electronics Storage Solutions — A moulded fuel cell that doubles as an electronics storage box plus an aluminium frame-mounted under-cab electronics tray provide multiple mounting options for your radio receiver, ESC, and other electronic components.
Technical Performance
The Trail Finder 2 represents the pinnacle of RC crawler engineering with specifications designed for serious off-road enthusiasts. At 1/10 scale with a wheelbase of 284mm (11.2 inches), width of 214mm (8.4 inches), and height of 203mm (8.0 inches), this crawler delivers impressive ground clearance of 45mm (1.8 inches) for navigating obstacles. The final drive ratio of 31.9:1 combined with the Hammer transfer case ratio of 1.47:1, R3 transmission ratio of 1:4.57 (internal 1.78:1), and Yota II axle ratio of 15/40 (2.67:1) creates a heavily geared setup optimised for torque-rich crawling rather than high-speed running. The transmission features a pinion/spur combination of 14/64, and the width at hex is 178.2mm (7.01 inches). This is a brushed motor platform, meaning you'll need to select a brushed motor in either 35T, 45T, or 55T configuration based on your desired balance between speed and torque—higher tooth count motors provide more torque at lower speeds, whilst lower tooth count motors favour speed over power. You'll also need to select appropriate electronics including a radio receiver with at least 3 channels (though 4 channels offer improved control), an electronic speed controller (ESC) suitable for brushed motors, and a battery pack (LiPo batteries are recommended with guidance from your chosen ESC manual). The suspension system uses super soft flex leaf springs for authentic vintage truck appearance and compliance, whilst the Ultimate Scale Shocks with 60/80mm sizing provide rebuildable, tuneable damping. All metal components utilise quality materials including machined billet aluminium for the chassis, frame-mounted electronics tray, shock bodies, and motor mount, whilst cast metal components such as the transmission case, transfer case exterior, and axle housings provide durability with reduced weight compared to solid steel alternatives.
What's in the Box
- RC4WD Trail Finder 2 Truck Kit with 1982 Toyota Pickup Hard Body Complete Set
- Billet aluminium ladder frame chassis
- R3 Scale Single-Speed Transmission with cast metal case
- Hammer Transfer Case with cast casing and heavy-duty gears
- Yota II Ultimate Scale Cast Axles (XVD)
- Ultimate Scale Shocks (60/80mm) in chrome finish
- Metal driveshafts with uni-joint construction
- Super soft flex leaf springs
- Stamped Steel 1.7" Beadlock SR5 Wheels in chrome (12mm hex, 23mm width, 47mm OD)
- BFGoodrich All Terrain KO2 1.7" scale tyres (X2S3 compound)
- 1982 Toyota Pickup hard body with functional hood
- Moulded dropped bed for scale accessories
- Bolt-on scale-accurate moulded cab back
- Marlin Crawler Side Plastic Sliders V2
- Marlin Crawler Front Winch Bumper with Stinger V2
- Rear plastic tube bumper
- Scale rock rails
- Moulded fuel cell electronics box
- Aluminium frame-mounted under-cab electronics tray
- Scale shock hoops and chassis servo mounts
- Hard body mounts
What You Need to Complete
- Brushed Motor — Select from 35T, 45T, or 55T options depending on desired speed/torque balance
- Radio System — Minimum 3-channel receiver (4-channel recommended for improved control). RC4WD offers the Z-R0009 (3-channel) or Z-R0006 (4-channel) as compatible options
- Electronic Speed Controller (ESC) — Must be compatible with brushed motors and your chosen battery type
- Servo (x2) — RC4WD recommends Twister High Torque Metal Gear Digital Servos (Z-E0035) for steering and throttle control
- Battery Pack — Consult your ESC manual for compatibility. RC4WD Z-E0090 or suitable LiPo batteries are recommended
- Battery Charger — Appropriate charger for your chosen battery type
- Hand Tools for Assembly — Hex drivers (1.5mm, 2mm, 2.5mm), long nose pliers, thread locking adhesive, cross wrench or nut driver (4mm, 5.5mm, 7mm)
- Body Assembly Tools — Modelling/craft knife, body reamer, side cutters, instant glue or plastic cement (non-whitening preferred), additional hex drivers (1.5mm, 2mm), small Phillips screwdriver
Frequently Asked Questions
- Is the RC4WD Trail Finder 2 suitable for beginners to RC crawling? — Whilst this is not a ready-to-run RC car, it is an excellent choice for builders with intermediate to advanced RC experience or dedicated newcomers willing to invest time in assembly. The kit requires approximately 2-3 hours to build and demands careful attention to detail, proper use of hex drivers to avoid stripping screws, and judicious application of thread lock adhesive. If you're new to RC and prefer immediate gratification, a ready-to-run model might be more suitable; however, if you're willing to learn the building process, the Trail Finder 2 rewards your effort with a machine you truly understand from the ground up.
- What motor and battery setup should I use for the Trail Finder 2? — The Trail Finder 2 is a brushed motor platform, so you'll need to select a brushed motor in 35T, 45T, or 55T configuration. Higher tooth count (55T) provides maximum torque for technical crawling, whilst lower tooth count (35T) favours speed. Your ESC manual will provide guidance on battery compatibility, but LiPo batteries are generally recommended for this class of RC crawler. Battery capacity and voltage will depend on your specific ESC and desired runtime, so consult the ESC specifications before purchasing.
- How much assembly is required for this kit? — This kit requires approximately 2-3 hours of assembly time. You'll need to carefully assemble the chassis, install the suspension components, mount the transmission and transfer case, install the axles and driveshafts, assemble the body, and install all electronic components. Whilst some components may arrive partially assembled, RC4WD recommends checking all hardware for tightness and applying thread lock where appropriate. Use quality hex drivers to avoid stripping screw heads, and do not over-tighten fasteners to prevent thread damage.
- What makes the Yota II Ultimate Scale Cast Axles special compared to other RC crawler axles? — These are marketed as the most scale-accurate axles on the market, featuring 8-degree round knuckles that replicate real Toyota steering geometry, removable differential covers for authentic appearance and maintenance access, lower mounting points for improved stance, and a compact offset pumpkin that saves space. Additionally, they're designed for versatility, accommodating leaf springs in both over-axle and under-axle configurations, which eliminates the need to flip the axle when reconfiguring your setup.
- Can I upgrade the Trail Finder 2 with parts from other RC brands? — Yes, one of the Trail Finder 2's greatest strengths is its compatibility with aftermarket upgrades. The R3 transmission is compatible with spur gears from Axial, Traxxas, and Robinson, allowing you to fine-tune your gearing for different terrain and driving styles. Additionally, RC4WD offers an extensive range of optional upgrades including alternative body sets, upgraded bumpers, winch systems, lighting kits, and performance drivetrain components that integrate seamlessly with this platform.
- Is the 1982 Toyota Pickup body only suitable for scale crawling, or can I use it for faster driving? — The 1982 Toyota Pickup body is specifically designed for scale crawling aesthetics, and with the Trail Finder 2's heavily geared drivetrain (final drive ratio 31.9:1), this truck is optimised for slow, technical terrain navigation rather than speed. However, the body does feature a bolt-on, scale-accurate moulded cab back, making it perfect for converting to a truggy-style build if desired, which could support faster driving with appropriate drivetrain modifications.
- What tools and materials do I need to build the Trail Finder 2? — You'll need hex drivers in 1.5mm, 2mm, and 2.5mm sizes, long nose pliers, a cross wrench or nut driver set (4mm, 5.5mm, 7mm), and thread locking adhesive for the chassis assembly. For body installation, you'll need a modelling or craft knife, body reamer, side cutters, and instant glue or plastic cement (non-whitening type is preferred to avoid cosmetic defects). RC4WD recommends checking all hardware before assembly and using quality tools to avoid damage.
- What is the ground clearance of the Trail Finder 2? — The Trail Finder 2 offers 45mm (1.8 inches) of ground clearance, which provides excellent obstacle-clearing capability whilst maintaining low centre of gravity for stability. This clearance is achieved through the combination of the billet aluminium ladder frame, leaf spring suspension geometry, and lower-mounting-point axles.
- Does the Trail Finder 2 come with a radio system and ESC? — No, the kit requires you to source your own radio system (minimum 3-channel, 4-channel recommended), brushed motor, ESC, servos, and battery pack. This modular approach allows you to select components that match your preferences and budget, but it does mean you need to have these items before you can run the truck after assembly.
- Can I use the Trail Finder 2 for water-based crawling? — Whilst the Ultimate Scale Shocks feature X-ring sealing technology for superior protection against leaks and contamination, and the electronics tray provides some water resistance, this kit is not specifically rated as waterproof. If you plan extensive water-based crawling, you should verify that all electronic components (motor, ESC, servo, receiver) are waterproof-rated before submersion.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the RC4WD TRAIL FINDER 2 TRUCK KIT WITH 1982 TOYOTA PICKUP BODY SET Z-K0070 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
