Â
Introduction
The original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling. From low-time to very experienced pilots, nearly everyone enjoys flying the Timber-but some wish it had even more aerobatic capability. The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat!
Key Features
- Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
- Enlarged and oversized control surfaces with double-beveled hinge lines
- Six durable and factory-installed high-torque, metal-geared servos
- High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
- Shock-absorbing landing gear with oversized tundra-style wheels
- Functional and factory-installed LED landing, navigation and strobe lights
- Lightweight yet durable composite-reinforced, hollow-core EPO construction
- Optional-use leading edge slats for improved STOL and slow flight performance
- Optional EDO-style floats (EFL5261, sold separately)
Needed to Complete
- Full-range, 5+ channel transmitter and receiver
- 2200-3200mAh 3-4S LiPo flight battery (EFLB22003S30recommended)
- Compatible LiPo charger
What's in the Box?
- (1) E-flite Timber X 1.2m with
- (1) 50A Brushless ESC
- (1) Brushless Outrunner Motor
- (6) High-Torque, Metal-Geared Servos
- (1) Set of Optional-Use Leading Edge Slats
- (1) Product Manual
Overview
The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly mild to wild experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that's capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. It's also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!
Â
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!
![Plug-N-Play<sup]()
® Completion Level src=https://s7d5.scene7.com/is/image/horizonhobby/PNP%5FLogo%5FPP.1?$Default$>
eXtreme Manoeuverability
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.
eXtra Power
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.
eXtremely Durable
Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.
STOL (Short Takeoff and Landing) Capable
The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor make it possible to spring into the air or float down to land in as little as two feet or less.
LED Lights
Like the original, the Timber X 1.2m comes with realistic-looking LED landing, navigation, and strobe lights that are factory-installed and powered from the flight battery.
Optional Floats
Owners of an original Timber 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.
 |
Download the fact sheet |
Â
- Model Number: A-EFL3875
- Brand: E-flite
- Model Name: Timber X 1.2m PNP
- Aircraft Type: STOL/3D Aerobatic Monoplane
- Wingspan: 1200mm (1.2m)
- Length: 1055mm
- Weight: 1560g
- Skill Level: 3 (Intermediate to Advanced)
- Motor Type: Brushless Outrunner
- Motor Size: 10-pole
- Motor KV: 900kV
- Electronic Speed Controller: 50A Brushless ESC
- Battery Compatibility: 3S and 4S LiPo
- Recommended Battery Capacity: 2200–3200mAh
- Battery Connector Types: EC3 or IC3
- Recommended Battery Models: EFLB22003S30 (3S) or EFLB22004S30 (4S)
- Servos: Six High-Torque Metal-Geared Servos with integrated LED circuits
- Control Surfaces: Ailerons, Flaps, Rudder, Elevator with oversized dimensions and double-beveled hinge lines
- Landing Gear: Shock-absorbing with oversized tundra-style wheels
- Wheel Size: 4.25 inches (foam material)
- Fuselage Construction: Lightweight composite-reinforced hollow-core EPO (expanded polypropylene)
- Lighting: Factory-installed LED landing lights, navigation lights and strobe lights
- Optional Accessories: Six leading edge slats included; EDO-style floats available separately (EFL5261)
- Package Type: PNP (Plug and Play)
- Radio Requirements: Full-range 5+ channel transmitter and receiver (not included)
- Battery Charger: Compatible LiPo charger required (not included)
- Included Components: Airframe, 50A ESC, Brushless Motor, Six Metal-Geared Servos, Leading Edge Slats, Product Manual
Overview
The E-flite Timber X 1.2m PNP (Part No. A-EFL3875) represents a significant evolution in short takeoff and landing aircraft design, combining the legendary STOL capabilities of the original Timber with genuine 3D aerobatic performance. This is an aircraft that bridges the gap between gentle, forgiving flying and dynamic, aggressive manoeuvres — making it an exceptional choice for RC aeroplane enthusiasts across the UK who want versatility without compromise. Whether you're a low-time pilot enjoying leisurely flights from your local flying field or an experienced aerobatic pilot pushing the limits, the Timber X 1.2m delivers an experience that grows with your skills.
What sets the Timber X 1.2m apart from conventional RC aeroplanes is its clever engineering approach. Rather than being a one-trick pony, this aircraft has been specifically designed to excel at both extremes of the flying envelope. The original Timber captured pilots' hearts with its incredible short takeoff and landing capabilities, but some pilots wanted more aerobatic potential. E-flite listened to that feedback and engineered the Timber X 1.2m with new wing design featuring oversized ailerons and flaps, combined with an enlarged rudder and elevator. These modifications, paired with a powerful 3S and 4S compatible brushless power system, transform the aircraft into a genuine 3D performer without sacrificing the forgiving STOL characteristics that make it so enjoyable to fly.
The PNP (Plug and Play) configuration means the aircraft arrives ready for experienced RC pilots to install their own transmitter and receiver, reducing the overall cost compared to fully assembled ready-to-fly models. This makes the Timber X 1.2m an intelligent purchase for RC enthusiasts in the UK who already own compatible radio equipment and want to expand their collection with a serious, high-performance aircraft without paying for duplicate radio systems.
Key Features
- Incredible STOL and 3D capabilities — The aircraft combines short takeoff and landing performance with full 3D aerobatic capability, meaning you can launch from tiny spaces and then execute loops, rolls and inverted manoeuvres with confidence. This dual capability is rare in RC aeroplanes and expands your flying options significantly.
- Enlarged control surfaces with double-beveled hinge lines — The oversized ailerons, flaps, rudder and elevator aren't just for show; they provide the authority needed for aggressive 3D flying whilst the double-beveled hinge line design reduces friction and improves control response. This engineering detail means your control inputs translate into precise, crisp aircraft movements.
- Six factory-installed high-torque metal-geared servos — Rather than plastic-geared servos that wear and fail, the Timber X 1.2m comes with durable metal-geared servos throughout. These high-torque units provide the strength needed for powerful control surface movements, and the metal construction means they'll last through hundreds of flights of aggressive flying without degradation.
- 3S and 4S compatible brushless power system — The included 50A brushless ESC and brushless outrunner motor are engineered to accept either 3-cell or 4-cell LiPo batteries. This flexibility means you can choose gentler 3S flying for calm days or pack more punch with 4S power when you want maximum performance, all with the same aircraft and power components.
- Shock-absorbing landing gear with oversized tundra-style wheels — The landing gear features shock absorption to cushion hard landings, whilst the oversized tundra-style wheels (4.25 inches in diameter) provide stability on uneven terrain. This means you can land on grass fields, rough ground and less-than-perfect surfaces without worrying about tipping over or damaging the aircraft.
- Functional factory-installed LED lighting — The aircraft comes with LED landing lights, navigation lights and strobe lights already installed. These aren't just cosmetic; they make the aircraft much easier to track during flight, especially in low-light conditions, and they look impressive during evening sessions.
- Lightweight composite-reinforced hollow-core EPO construction — The airframe uses EPO (expanded polypropylene) with composite reinforcement, creating a chassis that's light enough for efficient flight but durable enough to survive crashes and hard landings. Hollow-core construction keeps weight down whilst maintaining rigidity, and the EPO material is repairable if you do experience damage.
- Optional leading edge slats for improved STOL performance — Six optional-use leading edge slats are included in the box. These can be installed to further enhance slow flight and landing characteristics, giving you the ability to fine-tune the aircraft's behaviour depending on your flying style and conditions. This is a level of customisation you don't often see in ready-to-fly aircraft.
- Compatible with optional EDO-style floats — For water flying enthusiasts, the Timber X 1.2m can be equipped with optional EDO-style floats (sold separately as part number EFL5261), opening up the possibility of flying from lakes, ponds and coastal areas — a capability that's not available on most RC aeroplanes.
Technical Performance
The Timber X 1.2m represents sophisticated engineering in a compact 1.2-metre wingspan package. The airframe measures 1055mm in length and weighs just 1560 grams, creating an excellent power-to-weight ratio that contributes to the aircraft's responsive handling and impressive climb performance. The included 10-pole brushless outrunner motor spins at 900kV, meaning it produces strong torque at lower speeds — essential for achieving the short takeoff capabilities this aircraft is known for — whilst still having sufficient power for energetic 3D manoeuvres. The 50A brushless electronic speed controller provides ample power handling for both 3S and 4S LiPo configurations, with no need for upgrading even during aggressive flying sessions. The aircraft requires a 2200–3200mAh 3–4S LiPo flight battery with either EC3 or IC3 connectors; the manufacturer specifically recommends the EFLB22003S30 (3S) or EFLB22004S30 (4S) batteries. With proper battery management and a quality compatible LiPo charger, you'll enjoy excellent flight times whilst maintaining the performance characteristics E-flite engineered into this design. The composite-reinforced EPO construction is simultaneously light and durable, absorbing impact energy during landings without cracking or shattering like rigid plastic alternatives.
What's in the Box
- E-flite Timber X 1.2m airframe with integrated features
- 50A Brushless Electronic Speed Controller (ESC)
- Brushless Outrunner Motor (900kV, 10-pole)
- Six High-Torque Metal-Geared Servos with integrated LED lighting circuits
- Set of six Optional-Use Leading Edge Slats for enhanced STOL capability
- Product Manual with assembly and operation instructions
What You Need to Complete
- Full-range 5+ channel transmitter and receiver system (not included; must be compatible with the aircraft's servo configuration)
- 2200–3200mAh 3–4S LiPo flight battery with EC3 or IC3 connector (EFLB22003S30 for 3S or EFLB22004S30 for 4S recommended)
- Compatible LiPo battery charger capable of charging your selected battery type
Frequently Asked Questions
- Is the Timber X 1.2m suitable for beginner pilots? — The Timber X 1.2m is rated as Skill Level 3, indicating it's best suited to intermediate and experienced pilots rather than absolute beginners. However, if you're a beginner with access to experienced mentors at your local flying club, the forgiving STOL characteristics and stable handling make it achievable with proper instruction. Start with 3S batteries for gentler handling, progress to 4S once confident. The included leading edge slats can be installed to further soften the flight envelope if needed.
- What battery does the Timber X 1.2m need? — The aircraft is compatible with 3S and 4S LiPo batteries in the 2200–3200mAh capacity range. E-flite specifically recommends the EFLB22003S30 (3S) or EFLB22004S30 (4S) batteries. The 3S option provides lighter wing loading and gentler handling, whilst the 4S option offers increased power for more aggressive flying. Both configurations work seamlessly with the included 50A ESC and 900kV motor.
- What type of radio system do I need? — You'll need a full-range transmitter and receiver system with a minimum of 5 channels. This is a PNP aircraft, so the radio equipment is not included — you supply your own compatible system. Common options include Spektrum, Futaba and other established RC brands that support aircraft control.
- Can the Timber X 1.2m land on rough terrain? — Yes, the oversized 4.25-inch tundra-style foam wheels and shock-absorbing landing gear make the aircraft suitable for landing on grass, rough fields and uneven ground. This is one of its key strengths compared to conventional aeroplanes that require paved runways or very smooth surfaces.
- What is the difference between the Timber X 1.2m and the original Timber? — The Timber X 1.2m features a new wing design with oversized ailerons and flaps, plus an enlarged rudder and elevator, delivering genuine 3D aerobatic capability. The original Timber excels at STOL flying but lacks the aerobatic performance. The Timber X 1.2m combines both capabilities in one versatile airframe, making it the better choice for pilots who want variety in their flying experience.
- Can I use the optional leading edge slats? — Yes, six leading edge slats are included in the box and are entirely optional. Installing them enhances slow flight and landing characteristics, giving you a gentler flight envelope. Many pilots install them for improved STOL performance on calm days and remove them for more spirited flying sessions.
- Is the Timber X 1.2m waterproof? — The aircraft can land on water when equipped with optional EDO-style floats (sold separately, part number EFL5261). However, the basic airframe is not waterproof — it's designed for conventional land-based flying. The optional floats are what enable water operations.
- How durable is the EPO construction? — EPO (expanded polypropylene) with composite reinforcement is exceptionally durable. It absorbs impact energy rather than cracking, making it forgiving of hard landings. Minor damage can typically be repaired with foam-safe adhesives and tape, and the aircraft will continue flying reliably. This durability contributes to the low cost of ownership over time.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the EFL Timber X 1.2m PNP A-EFL3875 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
Finance Options
Click to see Novuna Finance Information
Novuna Personal Finance Available on this product
| DEPOSIT |
MONTHS |
APR |
MONTHLY PAYMENTS |
TOTAL AMOUNT PAYABLE |
| 24 Month Credit |
| £27.80 |
24 |
19.9% |
24 x £12.53 |
£328.52 |
| 36 Months Credit |
| £27.80 |
36 |
19.9% |
36 x £9.08 |
£354.68 |
| 48 Months Credit |
| £27.80 |
48 |
19.9% |
48 x £7.39 |
£382.52 |
| Buy Now Pay Later 48 months (6 months Deferred) |
| £27.80 |
48 |
24.9% |
48 x £8.71 |
£445.88 |
| Buy Now Pay Later 48 months (10 months Deferred) |
| £27.80 |
48 |
24.9% |
48 x £9.21 |
£469.88 |
| Buy Now Pay Later 48 months (12 months Deferred) |
| £27.80 |
48 |
24.9% |
48 x £9.74 |
£495.32 |
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
