Overview
Unleash your 1/8th scale vehicle's full potential with the MIP Bypass1™ Tapered Hi-Flow Piston Kit. Whether you're a competitive racer pushing for podium finishes or an enthusiast seeking to refine your RC buggy or truggy setup, this precision-engineered shock component delivers the performance tuning capability that separates winning setups from the rest. The MIP Bypass1 represents the pinnacle of shock damping technology, designed specifically for 1/8 scale RC cars where every fraction of a millimetre of suspension compliance translates directly into lap time and handling consistency.
Engineered for precision shock tuning, the MIP Bypass1 Tapered Hi-Flow Piston Kit 6-Hole x 1.3mm (part MIP24400) refines damping for 1/8 scale cars through groundbreaking piston design innovation. This is not merely a replacement component — it is a complete shock tuning system that grants you unprecedented control over your vehicle's suspension behaviour across varying track conditions. From tightly groomed indoor carpet circuits to outdoor clay and asphalt surfaces, the Bypass1 system adapts to your needs through its comprehensive valve selection, allowing you to dial in exactly the shock response your driving style demands.
The tapered piston profile promotes increased oil flow for smoother, more controlled shock action, helping deliver consistent handling and improved on-track responsiveness. This Hi-Flow design supports fine shock tuning for competitive 1/8 buggy and truggy setups, offering predictable performance across a wide range of track conditions. When you're searching for RC car upgrades in the UK or looking to enhance your ready to run RC model, the Bypass1 kit provides the professional-grade tuning depth that serious racers demand.
Key Features
- Tapered Hi-Flow Piston Design — The groundbreaking tapered piston geometry dramatically increases oil flow through the piston, allowing suspension fluid to move more freely and deliver smoother damping characteristics that respond precisely to track conditions and driving inputs, resulting in more predictable vehicle behaviour.
- 6-Hole x 1.3mm Precision Drilling — Four precision-drilled pistons with 1.3mm hole configuration provide the exact flow restrictions engineered for optimal 1/8 scale shock performance, delivering unparalleled responsiveness and consistency across your setup.
- Comprehensive Valve Selection — The kit includes five green valves, five blue valves and five matte valves, providing you with a complete tuning palette to dial in the exact damping curve that matches your driving style, track surface and weather conditions, giving you genuine competitive advantage.
- Professional Shock Tuning System — Rather than offering a single fixed solution, the Bypass1 system grants access to fine shock tuning that separates competitive race setups from baseline configurations, enabling you to optimise performance for specific race conditions or practice environments.
- Wide Brand Compatibility — Designed for compatibility with popular 1/8 scale vehicle platforms from Mugen, Associated, Tekno, Kyosho, X-Ray, TLR, Hot Bodies and Sparko, this kit integrates seamlessly with leading competition and hobby-grade 1/8 buggies and truggies.
- Engineered for 1/8 Scale Racing — Every aspect of this piston kit has been specifically engineered for the demands of 1/8 scale competition, where suspension tuning precision directly impacts lap times and handling consistency in both qualifying and race conditions.
Technical Performance
The MIP Bypass1 Tapered Hi-Flow Piston Kit represents the culmination of professional shock engineering principles applied to 1/8 scale suspension systems. The tapered piston profile is a precision-machined component manufactured to exacting tolerances, ensuring that oil flow characteristics remain consistent across hundreds of compression and rebound cycles. The 1.3mm hole diameter specification has been carefully calculated to provide optimal flow restriction for 1/8 scale shock absorbers, allowing suspension oil to move with the precise responsiveness required for high-speed off-road racing. The inclusion of three distinct valve types — green, blue and matte — provides racers with the flexibility to adjust damping rates without requiring multiple piston kits, essentially giving you three different shock setups within a single purchase. This modular approach to suspension tuning has become the standard amongst serious RC racers in the UK and internationally, as it allows for rapid fine-tuning between qualifying rounds, practice sessions and heat races. The engineering quality reflects MIP's reputation as a manufacturer of genuine competition-grade components that withstand the punishment of high-level 1/8 scale racing, where suspension components must survive repeated high-g impacts whilst maintaining their precise dimensional characteristics.
What's in the Box
- Four 6-Hole x 1.3mm Tapered Hi-Flow™ Pistons
- Five Green Valves
- Five Blue Valves
- Five Matte Valves
Frequently Asked Questions
- What is the difference between the MIP Bypass1 and standard piston kits for 1/8 scale RC cars? — The Bypass1 features a revolutionary tapered piston design that increases oil flow compared to conventional straight-bore pistons. This tapered profile delivers smoother damping action and greater responsiveness, giving you finer control over your 1/8 buggy or truggy's suspension behaviour. Standard pistons offer fixed flow characteristics, whilst the Bypass1 system grants you genuine tuning flexibility through its comprehensive valve selection.
- How many shock pistons and valves do I get in this kit? — The MIP24400 kit includes four 6-Hole x 1.3mm Tapered Hi-Flow pistons, plus a total of fifteen valves: five green, five blue and five matte variants. This gives you sufficient components to outfit a complete vehicle suspension system with spare pistons and access to multiple damping curves.
- Is the MIP Bypass1 suitable for beginners? — Whilst the Bypass1 kit is engineered primarily for competitive racers and serious enthusiasts seeking professional-grade suspension tuning, it is not a plug-and-play component for complete beginners to RC racing. You need existing knowledge of how to remove and install shock pistons and how valve selection affects suspension behaviour. However, if you own a 1/8 scale vehicle from Mugen, Associated, Tekno, Kyosho, X-Ray, TLR, Hot Bodies or Sparko and are ready to take your setup to a higher level, the Bypass1 system is an excellent investment.
- Will the MIP Bypass1 piston kit fit my 1/8 scale RC vehicle? — The kit is designed for compatibility with popular 1/8 scale platforms from Mugen, Associated, Tekno, Kyosho, X-Ray, TLR, Hot Bodies and Sparko. Before purchase, verify that your specific 1/8 buggy or truggy model uses standard 6mm shock pistons and is compatible with these brands' suspension systems.
- What is the advantage of having multiple valve colours in one kit? — The three valve types (green, blue and matte) provide different damping characteristics without requiring you to purchase multiple piston kits. By swapping valve types on your existing pistons, you can adjust your shock stiffness and response curve to suit different track conditions, weather, or driving styles — essential flexibility for competitive 1/8 scale racing.
- Where can I buy genuine MIP shock components in the UK? — As an authorised MIP retailer, RC Model Shop stocks genuine Bypass1 components with full manufacturer warranty and technical support, ensuring you receive authentic competition-grade parts backed by expert UK-based customer service.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the MIP BYPASS1 HI-FLOW PISTON KIT 6-HOLE x 1.3mm, 1/8TH SCALE MIP24400 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: MIP
- Model Number: MIP24400
- Product Name: Bypass1™ Tapered Hi-Flow Piston Kit
- Scale: 1/8th
- Piston Type: Tapered Hi-Flow
- Number of Piston Holes: 6
- Piston Hole Diameter: 1.3mm
- Number of Pistons Included: 4
- Piston Quantity with Spare: Four 6-Hole x 1.3mm Tapered Hi-Flow™ Pistons
- Green Valves Included: 5
- Blue Valves Included: 5
- Matte Valves Included: 5
- Total Valve Quantity: 15
- Compatible Vehicle Brands: Mugen, Associated, Tekno, Kyosho, X-Ray, TLR, Hot Bodies, Sparko
- Vehicle Type Compatibility: 1/8 Scale Buggies and Truggies
- Primary Feature: Tapered piston profile for increased oil flow
- Performance Benefit: Smoother, more controlled shock action
- Tuning Capability: Fine shock tuning for competitive setups
- Barcode: 691545244006
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
