G-PRO639706

Overview

The Pro-Line Bash Armor Chassis Protector in striking Blue is a premium upgrade for ARRMA 3S vehicles with long wheelbase configurations. Whether you're a seasoned RC car enthusiast in the UK or just discovering the thrills of remote control bashing, this chassis protector transforms your ARRMA 3S experience by adding a genuine protective layer to your vehicle's most vulnerable component. Pro-Line Racing, the renowned American manufacturer trusted by RC hobbyists worldwide, has engineered this Bash Armor series specifically to enhance both the durability and visual appeal of your ARRMA 3S rig.

If you've ever worried about chassis damage during aggressive bashing sessions, this is the solution you've been searching for. The Bash Armor Chassis Protector slaps directly over your existing stock chassis, creating an additional barrier against impacts, scrapes, and the inevitable bumps that come with enjoying your RC car at the track or in the garden. Unlike permanent modifications that could damage your original chassis, this protector is engineered to absorb punishment so your underlying chassis stays pristine. For anyone serious about protecting their investment whilst maintaining the aggressive aesthetic of their ARRMA 3S, this is an essential upgrade.

What sets this apart from generic aftermarket parts is the attention to detail and build quality you'd expect from a manufacturer that's been crafting RC performance parts since 1982. Made proudly in the USA from high-quality, high-strength nylon, this chassis protector isn't just functional—it's designed to take a beating and keep your truck looking stunning. Available in three striking colours—Pro-Line Blue, ARRMA Red, and Classic Stone Grey—you can perfectly match your paint scheme and create a cohesive, professional look across your entire rig.

Key Features

• Extra Durability to Protect Your Chassis — This chassis protector serves as a sacrificial barrier against impacts and abrasion, significantly extending the lifespan of your expensive factory chassis. Instead of your original chassis taking direct hits during crashes or aggressive runs, the Bash Armor absorbs the punishment, keeping your underlying frame safe from cracks, breaks, and expensive repairs.
• Easy to Change Out — Installation and removal require just a few simple screws, meaning you can swap this protector in minutes without special tools or technical knowledge. This ease of maintenance makes it perfect for casual bashers and serious competitors alike, allowing you to inspect your chassis regularly or replace a damaged protector without hassle.
• Three Colour Options Available — Choose from Pro-Line Blue, ARRMA Red, or Classic Stone Grey to match your specific paint scheme and personal style. This colour flexibility ensures your entire truck looks cohesive and professionally finished, whether you're running a red theme, blue theme, or neutral grey aesthetic.
• Made from High Quality & High Strength Nylon — The engineering behind this protector uses premium nylon material that balances impact absorption with structural rigidity. This material selection ensures the protector won't flex excessively under load, won't crack from UV exposure, and will withstand countless bashing sessions without permanent deformation.
• Designed to Take a Beating — Every aspect of this product is engineered with aggressive RC car use in mind. Whether you're jumping, sliding, crashing, or grinding across rough terrain, this chassis protector is purpose-built to handle the punishment that makes RC bashing so thrilling.
• Made in the USA Since 1982 — Pro-Line Racing's four decades of RC expertise translates directly into this product. American manufacturing means quality control and attention to detail that rivals far more expensive components, backed by a company with a proven track record in the RC community.
• Complete the Bash Armor Look — This protector is the first step in upgrading your ARRMA 3S's durability and style. You can further enhance your rig by adding matching Bash Armor Suspension Arms and Skid Plates, creating a fully coordinated, protective upgrade package that transforms your truck's appearance and resilience.

Technical Performance

The Bash Armor Chassis Protector represents a focused engineering solution for protecting the chassis component of 1/10 scale ARRMA 3S vehicles with long wheelbase configurations. Manufactured from high-strength nylon, this protector is engineered to absorb impact energy during crashes whilst maintaining structural integrity across multiple bashing sessions. The nylon material selected for this application offers superior wear resistance compared to softer plastics, meaning the protector itself resists gouging, scraping, and stress cracking from repeated impacts. The design philosophy centres on simplicity and effectiveness: by creating a protective layer that sits atop your factory chassis, the component sacrifices durability so your expensive original chassis doesn't have to. For UK-based RC enthusiasts who invest in quality ARRMA 3S vehicles for regular bashing, this represents excellent value protection against the cumulative damage that impacts cause over dozens of running sessions. The protector weighs negligibly compared to the overall vehicle, meaning installation has virtually no impact on performance characteristics, weight distribution, or handling dynamics. Installation is straightforward and requires no modifications to your existing chassis or suspension geometry, making this a truly bolt-on upgrade that can be installed or removed in minutes without disrupting your setup.

What's in the Box

• 1x Pro-Line Bash Armor Chassis Protector (Blue)
• 1x M3x12 Flat Head Cap Screw (FHCS)
• 1x M3 Locknut

Frequently Asked Questions

• Is this chassis protector suitable for all ARRMA 3S vehicles? — This Bash Armor Chassis Protector is specifically designed for ARRMA 3S vehicles with long wheelbase configuration. It is confirmed compatible with the ARRMA Senton 3S, ARRMA Senton Boost 4x2, ARRMA Senton MEGA 550, ARRMA Big Rock V3 3S, and ARRMA Typhon 3S and MEGA 550 models. If you own a short wheelbase ARRMA 3S variant, you would need a different protector designed for that chassis configuration.
• Will fitting this protector affect my truck's performance or handling? — No. The Bash Armor Chassis Protector adds negligible weight to your overall vehicle and requires no modifications to suspension geometry, motor mounts, or any performance-critical components. Your truck's acceleration, top speed, handling characteristics, and battery runtime remain completely unchanged after installation.
• How difficult is installation, and what tools do I need? — Installation is straightforward and can be completed in just a few minutes using basic tools. You'll need a small socket set or hex key to fit the M3x12 screws provided. No permanent modifications are required to your chassis, and the protector can be removed and reinstalled repeatedly without damaging either the protector or your underlying chassis.
• Can I replace just the protector if it gets damaged, or must I replace the whole assembly? — The beauty of the Bash Armor design is that if your protector becomes damaged after absorbing impacts during aggressive bashing, you simply replace the protector itself using the M3 fasteners provided. Your original factory chassis beneath remains completely intact, which is precisely what this protective layer is designed to achieve. This makes repairs extremely cost-effective compared to replacing your damaged original chassis.
• What colour options are available, and how do I choose? — Three colours are available: Pro-Line Blue (this model), ARRMA Red for vehicles in red paint schemes, and Classic Stone Grey for neutral or grey-themed builds. Your choice should match your truck's body colour and overall aesthetic vision. Many bashers choose colours that create visual continuity across their entire chassis and body for a factory-finished appearance.
• Is this part made in the USA? — Yes, Pro-Line Racing manufactures this Bash Armor Chassis Protector in the USA, maintaining the quality standards and manufacturing expertise the company has developed since 1982. This American manufacturing ensures rigorous quality control and product consistency that you can depend on.
• Can I use this with other Pro-Line Bash Armor parts? — Absolutely. The Bash Armor series includes compatible Suspension Arms and Skid Plates that coordinate perfectly with this chassis protector. Installing the complete Bash Armor package creates a fully protected, professionally coordinated appearance whilst maximising durability across all critical components.

Why Buy from RC Model Shop?

RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRO Bash Armor Chassis Protector (Blue) for ARRMA 3S Long WB G-PRO639706 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.

We want to make sure your delivery goes smoothly, so here are some important details about our service:

• For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
• Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
• Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
• If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
• We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
• As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
• If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
• For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.