Overview
This is a pair of Menace HP 1/8 Speed Run tires. Pro-Line Menace tires are 1:1 racing-inspired treads designed to handle extreme power and high speeds with ease. The low-profile carcass, deep grooves, and long-lasting compound make the Menace ideal for speed runs and are the highest speed-rated tires Pro-Line has ever produced!Â
The Menace HP 1/8 tires come pre-mounted with low-profile closed cell inserts on our sleek black Velocity dish wheels with 17mm hex for the perfect aero solution.
Please Note: the Menace HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Menace HP 1/8 tires that is 120 mph or about 11,000 RPM. Over-revving your Menace HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two, or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
PRO1023510 | Menace HP BELTED Speed Run 1/8 Tires Mounted on Black Velocity 17mm Wheels (2) for Front or Rear
Features
- Highest speed-rated tires PL has ever made
- Lightweight and Durable
- BELTED Tire Handles Extreme Power and High Speeds with Ease
- Racing-inspired Tread and Low-Profile Carcass, Great for Speed-Runs
- Foam Inserts Included
- Made in the USA, since 1982
Overview
Experience the ultimate in high-speed RC performance with the Pro-Line 1/8 Menace HP BELTED Speed Run F/R Tyres Mounted 17mm Black. These are not ordinary RC tyres – they represent the pinnacle of Pro-Line's tyre engineering and are the highest speed-rated tyres the company has ever produced. Whether you're a dedicated speed run enthusiast, a competitive RC racer, or someone looking to push their 1/8 scale RC car to its absolute limits, the Menace HP tyres deliver exceptional performance that serious hobbyists in the UK demand. Pro-Line, the legendary American tyre manufacturer since 1982, has crafted these tyres with racing-inspired DNA, combining 1:1 motorsport heritage with cutting-edge belted tyre technology that handles extreme power and velocity with remarkable ease.
The Menace HP 1/8 Speed Run tyres come factory pre-mounted on sleek black Velocity dish wheels fitted with 17mm hexagon hubs, providing an aerodynamic solution straight out of the box. Each pair includes low-profile closed-cell foam inserts designed to absorb impacts and maintain grip during aggressive high-speed runs. The combination of the low-profile carcass, deep grooves, and long-lasting compound makes these tyres ideal for speed runs, whether you're chasing top speed records with your brushless 1/8 scale RC car or testing the limits of your electric or nitro-powered machine. These are genuine Pro-Line products manufactured in the USA, backed by decades of RC racing expertise and trusted by competitors and enthusiasts across the UK and worldwide.
The belted construction represents a significant technological advancement in RC tyre design. Unlike traditional single-ply tyres, the internal belt structure provides superior structural integrity and sidewall support, allowing these tyres to maintain their shape and grip even at extreme speeds. This engineering makes the Menace HP particularly suitable for high-powered brushless 1/8 scale RC buggies, on-road vehicles, and speed bash builds where performance and durability are non-negotiable. If you're serious about RC performance in the UK market, these tyres deserve serious consideration.
Key Features
- Highest Speed-Rated Tyres Ever Made by Pro-Line — These represent the absolute peak of Pro-Line's tyre development, engineered specifically for extreme velocity and rated for a maximum speed of 120 mph or approximately 11,000 RPM, meaning you're investing in proven high-speed engineering that no other standard RC tyre in Pro-Line's lineup can match.
- BELTED Tyre Construction — The internal belt reinforcement provides superior structural support and rigidity compared to traditional non-belted tyres, ensuring the sidewalls remain stable under extreme stress and allowing the tyres to maintain consistent grip and handling characteristics throughout high-speed runs without deforming.
- Racing-Inspired Tread Design — Drawing directly from 1:1 motorsport tyre technology, the tread pattern is optimised for on-road performance and delivers predictable handling, precise feedback, and responsive cornering when mounted on compatible 1/8 scale vehicles with 17mm hexagon hubs.
- Low-Profile Carcass Construction — The shallow sidewall profile reduces unsprung mass and improves aerodynamic efficiency, resulting in faster acceleration and higher top speeds, making this design particularly effective for dedicated speed run applications and competitive racing scenarios.
- Deep Groove Design — The aggressive tread grooves are engineered to channel air and water efficiently, improve traction feedback, and provide visual confirmation of grip level, whilst the groove pattern enhances the visual appeal of these professionally-designed competition tyres.
- Long-Lasting Compound — The rubber compound is formulated for durability and wear resistance, providing consistent performance across multiple heat cycles and extended running sessions, which means better value for money and less frequent tyre replacement.
- Pre-Mounted on Black Velocity Dish Wheels — The tyres arrive factory-mounted on genuine Pro-Line black Velocity dish wheels with 17mm hexagon fitment, saving you assembly time and ensuring perfect balance and alignment right out of the box for immediate deployment.
- Closed-Cell Foam Inserts Included — Each tyre includes low-profile closed-cell foam inserts that absorb impacts from kerbs and track imperfections, maintain consistent tyre pressure, and improve overall handling stability during high-speed cornering and acceleration.
- Aerodynamic Dish Wheel Design — The sleek black dish wheels feature a refined aesthetic that reduces visual drag and provides a professional motorsport appearance, whilst the disc design improves brake cooling and reduces unsprung weight for enhanced performance.
- Compatible with Multiple Premium 1/8 Scale Platforms — These tyres fit a comprehensive range of modern 1/8 scale RC vehicles including ARRMA Limitless V2, Infraction 6S, Felony 6S, and Typhon 6S models, as well as HoBao Extreme and Hyper series vehicles, plus any other 1/7 or 1/8 scale RC car equipped with 17mm hexagon wheel hubs.
- Made in the USA Since 1982 — Pro-Line's heritage as an American manufacturer means these tyres benefit from over forty years of racing experience, continuous quality control standards, and proven reliability across thousands of competitive events worldwide and throughout the UK RC racing community.
- Sold as a Pair — Each package contains two complete Menace HP BELTED Speed Run tyre and wheel assemblies, providing front and rear coverage for your 1/8 scale RC vehicle or allowing you to maintain a spare set for racing or speed run events.
Technical Performance
The Menace HP BELTED Speed Run tyres represent a significant leap forward in 1/8 scale RC tyre engineering, specifically designed for speed run enthusiasts and competitive racers who demand the absolute maximum performance from their brushless or high-powered RC vehicles. The belted construction is the key innovation here – unlike traditional RC tyres that rely solely on the rubber carcass for structural integrity, the Menace HP incorporates an internal belt system that reinforces the tyre structure and prevents deformation at extreme speeds. This engineering breakthrough allows these tyres to safely operate at the maximum rated speed of 120 mph (approximately 11,000 RPM) without experiencing the internal belt failure that would occur with non-belted alternatives. The low-profile carcass reduces rolling resistance and unsprung mass, contributing to faster acceleration and higher top-end velocity – critical performance metrics for speed run specialists. The deep grooves cut into the tread surface serve multiple purposes: they improve traction modulation by providing consistent feedback to the driver, enhance water drainage if conditions are wet, and visually indicate tyre wear progression. The long-lasting rubber compound is specifically formulated to resist heat degradation during extended high-speed running sessions, which is essential when operating at or near maximum RPM limits. The tyre diameter and width have been optimised for minimal rolling resistance whilst maintaining adequate grip, and the low-profile closed-cell foam inserts maintain internal pressure consistency and dampen impacts from track irregularities. These tyres are compatible with any 1/8 scale RC vehicle equipped with 17mm hexagon hubs, including the latest generation ARRMA brushless buggies such as the Typhon 6S, Infraction 6S, and Felony 6S models, as well as HoBao Hyper and Extreme series vehicles and other comparable 1/8 scale platforms. The black Velocity dish wheels feature an aerodynamic profile that reduces visual drag and improves overall efficiency at high speed, and their refined aesthetic provides a professional competition appearance suitable for display and serious racing applications.
What's in the Box
- Two Menace HP BELTED Speed Run 1/8 Tyres
- Two Black Velocity Dish Wheels with 17mm Hexagon Hubs
- Two Low-Profile Closed-Cell Foam Inserts
Frequently Asked Questions
- What is the maximum safe speed rating for these Menace HP BELTED tyres? — The Menace HP tyres have a maximum speed rating of 120 mph or approximately 11,000 RPM. Exceeding this speed limit can result in permanent damage to the internal belt structure, which is not covered under warranty. It is critical to monitor your vehicle's RPM and speed carefully to avoid over-revving, which can be caused by holding the throttle open whilst one or more tyres are stopped (known as diffing out), as this substantially increases the RPM sent to free-spinning tyres.
- Are these tyres suitable for my ARRMA 1/8 scale RC buggy? — Yes, these Menace HP BELTED Speed Run tyres are fully compatible with multiple ARRMA 1/8 scale vehicles including the Typhon 6S V5 BLX, Infraction 6S BLX, Felony 6S, and other 1/7 to 1/8 scale models equipped with 17mm hexagon wheel hubs. They are also compatible with HoBao Hyper and Extreme series vehicles, making them an excellent upgrade option for competitive racing and high-speed running.
- What makes these tyres different from Pro-Line's other 1/8 scale options? — The Menace HP BELTED Speed Run tyres are the highest speed-rated tyres Pro-Line has ever produced, featuring an innovative internal belt structure that prevents deformation at extreme velocities. The combination of the belted construction, low-profile carcass, deep grooves, and specialised long-lasting compound makes these specifically engineered for speed runs and high-power applications, whereas other Pro-Line tyre ranges are optimised for different conditions such as off-road terrain or varied weather.
- Do I need to assemble these tyres myself? — No, these tyres arrive pre-mounted on the black Velocity dish wheels with 17mm hexagon hubs and include the foam inserts, so you can use them immediately out of the box. Simply mount them onto your compatible 1/8 scale RC vehicle and you are ready to run.
- What is the difference between belted and non-belted RC tyres? — Belted tyres incorporate an internal reinforcing belt structure that provides superior structural support and prevents tyre deformation under extreme stress and high-speed operation. This makes belted tyres significantly more suitable for maximum speed applications and high-powered vehicles, whereas non-belted tyres are designed for more general-purpose use and cannot safely operate at the extreme velocities that the Menace HP is rated for.
- Can I use these tyres on the front and rear of my RC buggy? — Yes, the Menace HP BELTED Speed Run tyres are designed for front and rear use on compatible 1/8 scale vehicles. Each package contains a pair (two tyres), so you may need to purchase multiple sets if you require four tyres for a four-wheel-drive buggy configuration.
- What warranty coverage do these tyres have? — Pro-Line tyres include standard manufacturer warranty coverage. However, it is important to note that damage caused by exceeding the maximum speed rating of 120 mph or 11,000 RPM is explicitly not covered under warranty, as this can cause internal belt failure. Additionally, damage resulting from diffing out the tyres or holding throttle open whilst tyres are stopped is not covered by the warranty.
- Are these tyres suitable for wet weather RC racing? — The deep grooves in the Menace HP tread design provide improved water drainage and wet traction characteristics compared to smooth-tyred alternatives. However, these are primarily engineered for speed runs and high-speed on-road performance; for dedicated wet weather racing, you should consult Pro-Line's product guide to determine if specialist wet weather tyres would be more appropriate for your specific conditions.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Pro-Line, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Pro-Line 1/8 Menace HP BELTED Speed Run F/R Tyres Mounted 17mm Black G-PRO1023510 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
