Overview
This is a pair of Dumont Paddle Sand/Snow Tires Mounted on Raid 5.7" Black Wheels. Are you ready for the most extreme Paddle tires Pro-Line has ever made for Monster Truck? Introducing the Dumont 5.7" tires that have been designed from the ground up for your X-MAXX® and KRATON™ 8S to sling sand and snow further than ever before and look good doing it!
The Dumont 5.7" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter.
The Raid 5.7" Black Wheel now features a removable hex for ultimate versatility! Not only do the included hexes allow you to choose between the KRATON™ 8S and X-MAXX® axle sizes, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires and eliminate the need for other adapters or wheel modification. The hefty 8x48 interlocking hex design is secured to the wheel by 8 M3 screws that are spaced 48mm across. Replacement Hexes are available separately (PRO638300).
Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has a bold style to match. The Dumont Paddle tires are glued to the big diameter Raid wheel for the ultimate in lightweight performance. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA!
Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your X-MAXX® or KRATON™ 8S Truck today!
Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.
Please note: All tires & wheels are sold in pairs, unless otherwise noted
PRO1020211Â | Dumont 5.7" Paddle Sand/Snow Tires Mounted on Raid Black 8x48 Removable 24mm Hex Wheels (2) for X-MAXX®, KRATON™ 8S & Other Large Vehicles Front or Rear
X-MAXX® is a registered trademark of Traxxas® L.P.
Features
TIRE FEATURES - Extreme Paddle Tires for Sand and Snow
- Latest Paddle Tire Technology - Large Offset V-shaped Tread
- Pro-Line P-L Logos Embedded into Tire Carcass
- Raid Wheel with Replaceable 24mm hexes to fit KRATON™ 8S or X-MAXX®
- Made in the USA, since 1982
WHEEL FEATURES - Easily Replace Damaged Hexes
- KRATON™ 8S or X-MAXX® 8x48 24mm Hexes are Included
- Wheel Made from High-strength, Durable DuPont Nylon Material
- Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
- M3 Wheel Hex Hardware Included
- Made in the USA, since 1982
Fits
- KRATON™ 8S (ARA110002) Front or Rear
- X-MAXX® Front or Rear
- Other Large-Scale Vehicles with 24mm Hexes
Overview
Are you ready for the most extreme paddle tyres Pro-Line has ever made for monster truck RC cars in the UK? Introducing the Dumont 5.7" tyres that have been designed from the ground up for your X-MAXX® and KRATON™ 8S to sling sand and snow further than ever before and look good doing it! This is a pair of Dumont Paddle Sand/Snow Tyres mounted on Raid 5.7" black wheels, offering the ultimate pre-assembled solution for serious RC enthusiasts looking to dominate off-road terrain. Whether you're a competitive racer or a weekend basher, these ready-to-run wheel and tyre sets deliver the performance and style you need to stand out on the track or in the dunes.
The Dumont 5.7" tyre uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tyre carcass, giving it the style you have come to expect from Pro-Line. The Dumont Paddle tyre gets its name from the incredible Dumont Sand Dunes in California, but these paddle tyres are equally at home shredding your local snowfield in the winter. The tyres are glued to the big diameter Raid wheel for the ultimate in lightweight performance, and this entire package is proudly manufactured at Pro-Line Headquarters in the USA. If you're serious about RC monster truck performance and want a quality product backed by decades of Pro-Line expertise since 1982, this is the wheel and tyre package for you.
Don't get stuck spinning your tyres in the sand or snow. Get a set of pre-mounted Dumont Paddle tyres for your X-MAXX® or KRATON™ 8S truck today and experience the difference that quality engineering and innovative tread design can make to your RC driving experience.
Key Features
- Extreme Paddle Tyre Design for Sand and Snow — The Dumont 5.7" tyres feature advanced paddle tread technology specifically engineered for maximum performance in loose terrain, whether you're driving through sand dunes or snow-covered fields, making them versatile for all-season RC adventures.
- Latest Paddle Tyre Technology with Large Offset V-Shaped Tread — The large offset V-shaped paddle design delivers exceptional roosting power and traction in soft surfaces, allowing your X-MAXX® or KRATON™ 8S to accelerate and manoeuvre with confidence in challenging conditions.
- Pro-Line P-L Logos Embedded into Tyre Carcass — Professional styling is built into the tyre itself, with branded Pro-Line logos embedded in the rubber, giving your RC monster truck the authentic look of a genuine performance vehicle.
- Raid 5.7" Black Wheels with Removable Hexes — The innovative removable hex system offers ultimate versatility, allowing you to easily switch between KRATON™ 8S and X-MAXX® axle sizes without needing adapters or wheel modifications, and you can replace damaged hexes without replacing your glued tyres.
- 8x48 Interlocking Hex Design with M3 Hardware — The hefty 8x48 interlocking hex is secured with 8 M3 screws spaced 48mm across, providing rock-solid durability and reliability for demanding off-road conditions.
- High-Strength DuPont Nylon Wheel Material — The Raid wheels are constructed from tough, durable DuPont nylon that mimics the design of popular full-size off-road wheels, ensuring your RC tyres and wheels can handle extreme driving without cracking or breaking.
- 10-Spoke Wheel Design — Inspired by full-size racing wheels, the bold 10-spoke design provides both exceptional strength and striking visual appeal that complements any monster truck setup.
- Pre-Glued and Ready to Use — These tyres arrive mounted and glued to the wheels, so there's no assembly required – simply fit them to your truck and start driving, saving you time and hassle.
- Lightweight Performance Engineering — The pre-mounted assembly delivers lightweight performance through careful construction, ensuring your X-MAXX® or KRATON™ 8S responds quickly and efficiently to your commands.
- Made in the USA Since 1982 — Pro-Line's long heritage of RC excellence and manufacturing expertise in the United States means you're buying quality that has been proven in competition and real-world driving for over four decades.
Technical Performance
The Dumont Sand/Snow tyre and Raid wheel combination represents the pinnacle of Pro-Line's engineering expertise, specifically engineered for 1/6 scale monster trucks. These pre-mounted wheel and tyre sets feature tyres glued to a large-diameter Raid wheel for the ultimate in lightweight performance, with each tyre designed using the latest paddle technology featuring large offset V-shaped treads. The wheel assembly uses a robust 8x48 interlocking hex design secured by eight M3 screws spaced exactly 48mm apart, providing uncompromising durability in extreme conditions. The Raid wheels are manufactured from high-strength DuPont nylon material with a professional 10-spoke design, whilst the removable 24mm hexes (included with your purchase) allow you to switch between KRATON™ 8S and X-MAXX® configurations without needing additional adapters. The entire package is manufactured to exacting standards at Pro-Line Headquarters in the USA, ensuring consistent quality and performance across every set you purchase.
What's in the Box
- 2x Dumont 5.7" Paddle Sand/Snow Tyres
- 2x Raid 5.7" Black 10-Spoke Wheels
- Removable 24mm Hexes for KRATON™ 8S and X-MAXX® compatibility
- M3 Wheel Hex Hardware
Compatibility and Fitting
- Fits ARRMA KRATON™ 8S (ARA110002) front or rear
- Fits Traxxas X-MAXX® front or rear
- Compatible with other large-scale vehicles featuring 24mm hexes
- 24mm hex fitting for secure axle mounting
- Works with all X-MAXX® and KRATON™ 8S variants including coloured editions
Maintenance and Care Tips
Pro-Line recommends taking steps to protect your tyres when running in water, mud, or sand. Foreign materials can enter the tyre through the wheel vent hole, which may cause the foam inserts to break down, making the tyre excessively heavy or unbalanced and causing unnecessary wear. A quick and easy solution is to place a piece of waterproof tape (such as duct tape) over the wheel vent hole before driving in wet or sandy conditions. Replacement hexes are available separately (PRO638300) if you need spares or replacements after heavy use.
Frequently Asked Questions
- Are these Dumont tyres suitable for both sand and snow conditions? — Yes, absolutely. The Dumont 5.7" tyres have been specifically engineered for both sand and snow environments. The name "Dumont" references the famous Dumont Sand Dunes in California, but the paddle tread design is equally effective at shredding snowfields in winter conditions, making them a genuinely versatile choice for all-season RC driving.
- Will these tyres fit my Traxxas X-MAXX® or ARRMA KRATON™ 8S? — Yes, these wheels and tyres are specifically designed for both the Traxxas X-MAXX® and ARRMA KRATON™ 8S monster trucks. They come with removable 24mm hexes that fit both vehicle configurations, so you can easily switch between the two if you own both trucks or want to change your setup later.
- Do I need to glue these tyres myself? — No, these tyres come pre-glued and pre-mounted on the Raid wheels, ready to fit directly onto your monster truck. There's no assembly required, which means you can start driving immediately after purchase.
- What makes the removable hex system so useful? — The removable hex design is incredibly practical. It allows you to switch between KRATON™ 8S and X-MAXX® axle sizes without purchasing different wheels, and if you damage a hex during heavy driving, you can replace just the hex without needing to replace the entire pre-glued tyre and wheel assembly, saving you money and time.
- Can I replace the hexes if they get damaged? — Yes, replacement 24mm hexes are available separately under part number PRO638300. The removable hex design means you can swap out a damaged hex easily without affecting your tyres, making maintenance simple and cost-effective.
- What material are the Raid wheels made from? — The Raid 5.7" wheels are manufactured from high-strength DuPont nylon, a durable engineering plastic that can withstand the stresses of extreme off-road driving whilst remaining lightweight for optimal performance.
- Is this a complete wheel and tyre solution or do I need to buy additional parts? — This is a complete pre-assembled solution. You get the tyres, wheels, removable hexes, and M3 hardware – everything you need to fit them to your X-MAXX® or KRATON™ 8S. Simply fit them to your axles and start driving.
- What is the difference between these Dumont tyres and other Pro-Line paddle tyres? — The Dumont 5.7" represents Pro-Line's latest paddle tyre technology, specifically designed from the ground up for the 1/6 scale X-MAXX® and KRATON™ 8S monsters trucks. The large offset V-shaped paddle design and embedded Pro-Line logos reflect the brand's most recent engineering advances in paddle tyre design.
- How do I prevent water and mud from getting inside the tyres? — Pro-Line recommends placing waterproof tape (such as duct tape) over the wheel vent hole before driving in water, mud, or sand. This simple step prevents foreign materials from entering the tyre and damaging the foam inserts, which can otherwise become heavy or unbalanced.
- Is this product suitable for beginners? — Yes, these pre-mounted and glued wheel and tyre sets are excellent for RC beginners because there's no assembly work required. However, they are designed for serious 1/6 scale monster trucks like the X-MAXX® and KRATON™ 8S, which are themselves advanced models. If you're completely new to RC, you may want to start with a smaller or simpler truck before moving to these premium large-scale vehicles.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRO 1/6 Dumont Sand/Snow Front/Rear 5.7 inch Tires Mounted on Raid 8 G-PRO10202-11 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
