Overview
Upgrade your TRX-4M™ trail truck with the Traxxas Axle Shafts and Stub Axles set, a heavy-duty drivetrain component designed to maximise strength and durability for serious RC enthusiasts across the UK. Whether you're bashing through challenging terrain with your 1/18 Ford Bronco, Land Rover Defender, Chevrolet K10, or F-150, this hardened steel axle set delivers the ultimate in performance and reliability. These premium components are engineered for RC car owners who demand the best from their ready to run RC vehicles, offering significantly improved longevity compared to standard equipment.
The TRX9756 represents a professional-grade upgrade path for anyone who owns a TRX-4M scale trail truck and wants to take their RC driving experience to the next level. Made from high-grade hardened steel throughout, this comprehensive axle assembly package provides the strength needed for aggressive trail driving, rock crawling, and extended play sessions without premature wear or component failure. If you're serious about maintaining peak performance from your 1/18 RC crawler or trail truck, this is the upgrade you need.
RC Model Shop stocks the full range of genuine Traxxas spare parts and upgrades, making it easy for UK RC enthusiasts to maintain and enhance their vehicles. This axle shaft set is a recognition of Traxxas's commitment to providing aftermarket solutions that keep your RC vehicle performing at its best, whether you're a weekend basher enjoying outdoor trail runs or someone preparing for competitive RC events.
Key Features
- Complete Front and Rear Axle Set — This package includes two front axle shafts and two rear axle shafts, providing a comprehensive drivetrain upgrade that addresses both ends of your TRX-4M trail truck simultaneously, ensuring balanced performance and reliability across the entire chassis.
- Hardened Steel Construction — Every component in this set is manufactured from high-grade hardened steel, which provides exceptional strength and wear resistance compared to standard materials, allowing your RC car to handle aggressive driving conditions without component degradation or failure.
- Front Stub Axles Included — The package includes two front stub axles manufactured from the same hardened steel specification, ensuring that your front axle assembly matches the durability and performance characteristics of the main axle shafts for consistent handling and reliability.
- Complete Hardware Package — Beyond the axle shafts themselves, Traxxas includes all necessary fastening components: two 1.5x7.8mm dowel pins, four 1.5x6mm dowel pins, and two cross pins, meaning you have everything required for a complete installation without sourcing additional hardware.
- TRX-4M Platform Compatibility — Specifically engineered for the entire TRX-4M range of 1/18 scale trail trucks, including the Ford Bronco, Land Rover Defender, Chevrolet K10, and Ford F-150 models, as well as the TRX-4MT Monster Truck variants, ensuring perfect fitment and performance.
- Extreme Heavy-Duty Rating — Traxxas classifies this as an Extreme HD (Heavy-Duty) component set, indicating that it meets their highest durability standards and can withstand the stresses of intensive RC driving, making it ideal for owners who push their vehicles hard.
Technical Performance
The Traxxas TRX9756 axle shaft assembly represents a significant step up in drivetrain durability and performance for TRX-4M trail trucks. Every component is manufactured from high-grade hardened steel, which undergoes specialist heat treatment to achieve exceptional hardness and wear resistance. The front axle shafts work in conjunction with the included front stub axles to create a robust front axle assembly capable of handling the lateral loads and impacts generated during aggressive trail driving, rock crawling, and off-road exploration. The rear axle shafts are engineered to transmit power from the differential to the rear wheels whilst maintaining structural integrity through repeated acceleration cycles and challenging terrain. The inclusion of multiple dowel pins and cross pins ensures that the assembly maintains alignment and structural unity even under extreme stress. The hardened steel specification means these components will resist the surface deformation and wear that can occur with standard materials, extending the service life of your drivetrain and reducing the need for frequent replacement. This is a transmission-focused upgrade that directly impacts the longevity and reliability of your RC vehicle's driveline system. Whether you're running your TRX-4M on rocky trails, muddy terrain, or rough backyard courses, the Extreme HD specification of this axle set provides confidence that your drivetrain will handle whatever challenges you present.
What's in the Box
- Front axle shafts (2)
- Rear axle shafts (2)
- Front stub axles (2)
- 1.5x7.8mm dowel pins (2)
- 1.5x6mm dowel pins (4)
- Cross pins (2)
Frequently Asked Questions
- Is this axle set suitable for my TRX-4M trail truck? — Yes, this set is specifically designed for all TRX-4M platform vehicles, including the 1/18 Ford Bronco, Land Rover Defender, Chevrolet K10, Ford F-150, and the TRX-4MT Monster Truck variants. Simply confirm your vehicle model against the compatibility list to ensure proper fitment before ordering.
- What does Extreme Heavy-Duty mean for RC axle shafts? — Extreme Heavy-Duty (Extreme HD) is Traxxas's classification for components engineered to withstand the most demanding driving conditions. For axle shafts, this means the hardened steel has been treated to maximum hardness specifications, providing superior resistance to wear, deformation, and breakage compared to standard components, making them ideal for aggressive trail driving and rock crawling.
- Will upgrading to these hardened steel axles improve my RC truck's performance? — These axle shafts are primarily a durability upgrade rather than a performance upgrade in terms of speed or acceleration. However, by providing superior reliability and longer service life, they allow your TRX-4M to maintain consistent performance over extended periods, and the improved structural integrity means less deflection under load, which can result in improved handling consistency during trail driving.
- Do I need any additional parts to install this axle set? — The package includes all necessary pins and fasteners required for installation, so no additional hardware is needed. However, you may need basic RC tools such as hex drivers to remove the old axles and install the new ones. If your differential output assemblies are worn, Traxxas recommends also fitting their 6828A differential output assemblies to complete a full driveshaft assembly upgrade.
- How long does it take to install these axle shafts? — Installation time depends on your mechanical experience and the tools available, but typically takes 30-60 minutes for someone familiar with RC vehicle maintenance. If you're new to RC car maintenance, we recommend consulting the official Traxxas installation guide or watching instructional videos before beginning.
- Are these genuine Traxxas parts? — Yes, the TRX9756 is a genuine Traxxas part manufactured to their original specifications. RC Model Shop is an authorised Traxxas retailer, and all parts are authentic original equipment.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas Axle Shafts, front and rear (2) / stub axles, front (2) (hardened steel) TRX9756 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Traxxas
- Part Number: TRX9756
- EAN: 020334975607
- Product Type: Axle Shaft and Stub Axle Set
- Tune-Up Type: Transmission
- Material: Hardened Steel
- Components Included: Axle shafts front (2), Axle shafts rear (2), Stub axles front (2), 1.5x7.8mm dowel pins (2), 1.5x6mm dowel pins (4), Cross pins (2)
- Classification: Extreme Heavy-Duty
- Compatible Vehicles: TRX-4M Ford Bronco 1/18 (all colours), TRX-4M Land Rover Defender 1/18 (all colours), TRX-4M Chevrolet K10 1/18 (all colours), TRX-4M Ford F-150 1/18 (all colours), TRX-4MT F-150 Monster Truck 1/18 (all colours), TRX-4MT K10 Monster Truck 1/18 (all colours)
- Scale: 1/18
- Fits: Left or right (stub axles)
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
