Tire Features:
- Extreme Paddle Tires for Sand and Snow
- Latest Paddle Tire Technology - Large Offset V-shaped Tread
- Pro-Line P-L Logos Embedded into Tire Carcass
- Incredible Performance and Style!
- Made from Very Stiff and Long-lasting Paddle Tire Rubber
- Foam Inserts Included
- Made in the USA, since 1982
Wheel Features:
- Removable Hexes Allow you to Change Wheel Offsets on the Fly
- Easily Replace Damaged Hexes or Upgrade to 17mm hexes
- The 2 Most Common Offsets are Included
- Fits any of Pro-Line's 6x30 Removable Wheel Hexes
- Wheel Made from High-strength, Durable DuPont Nylon Material
- Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
- M3 Wheel Hex Hardware Included
Overview:
Are you ready for the most extreme 2.8" Paddle tires Pro-Line has ever made for 1:10 Monster Truck? Introducing the all-new Dumont 2.8" tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!
The Dumont 2.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:10 Monster Truck today!
Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.
The Dumont 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable 12mm Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes) or even upgrading your wheels to 14mm (PRO634700 Sold Separately) or 17mm wheel hexes (PRO633600 Sold Separately) for extreme use! These new Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere!
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
Learn More About the Removable Hex Wheel:
Fits:
- Stampede® 2wd
- Stampede® 4x4
- Other 1:10 Monster Trucks with 12mm Hexes
Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks!
- 12mm (narrow & wide) (PRO633700 12mm Aluminum Narrow / PRO633701 12mm Aluminum Wide / PRO633500 12mm Plastic Narrow and Wide)
- 14mm (PRO634600 14mm Aluminum / PRO634700 14mm Plastic)
- 17mm (PRO633800 17mm Aluminum / PRO633600 17mm Plastic)
Overview
Are you ready for the most extreme 2.8" paddle tyres Pro-Line has ever made for 1/10 Monster Trucks? The all-new Dumont 2.8" tyres have been designed from the ground up to sling sand and snow further than ever before whilst looking incredible doing it. Whether you're an experienced RC enthusiast looking to upgrade your existing monster truck or a UK-based basher searching for premium pre-mounted tyres that deliver maximum performance, the Dumont represents the pinnacle of paddle tyre technology for serious off-road RC driving. These are not your average sand tyres—they're engineered to provide exceptional traction and roosting power in the most challenging terrain.
The Dumont Paddle tyre gets its name from the incredible Dumont Sand Dunes in California, but these exceptional tyres are equally at home shredding your local snowfield during winter months. Made in the USA since 1982, Pro-Line's commitment to quality and innovation means you're investing in a product backed by decades of racing heritage and proven performance. Don't get stuck spinning your tyres in the sand or snow—get a set of pre-mounted Dumont Paddle tyres for your 1/10 Monster Truck today and experience the difference that true engineering excellence makes.
These pre-mounted tyres come delivered on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable 12mm Hex Wheel. This revolutionary design allows you to change wheel offsets on the fly, making these tyres adaptable to multiple truck platforms and configurations. Whether you're running a Traxxas Stampede 2WD, Stampede 4x4, or other 1/10 Monster Trucks with 12mm hexes, the Dumont system offers the flexibility and performance you need.
Key Features
- Extreme Paddle Tyre Design for Sand and Snow — The Dumont 2.8" tyres feature the latest paddle tyre technology with large offset V-shaped tread patterns that are specifically engineered to maximise roosting power and traction in sand, snow, and soft terrain. This isn't a compromise design; it's purpose-built for extreme conditions where standard tyres simply won't cut it.
- Latest Paddle Tyre Technology with Offset V-shaped Tread — The unique V-shaped paddle design creates superior bite and propulsion in loose surfaces. Unlike flat paddles, the offset geometry prevents clogging and maintains consistent performance even when conditions are at their most challenging, ensuring you can push harder and go further than the competition.
- Pro-Line P-L Logos Embedded into Tyre Carcass — Beyond just performance, these tyres look the part with Pro-Line's iconic P-L logos embedded directly into the tyre rubber. This is the signature styling you've come to expect from Pro-Line, adding visual impact to your RC monster truck whilst maintaining the durability and longevity of the tyre structure.
- Made from Very Stiff and Long-lasting Paddle Tyre Rubber — The compound used in the Dumont tyres is specifically formulated to withstand the punishing demands of sand and snow driving. The stiffer rubber resists deformation, maintains consistent shape through aggressive driving, and delivers a longer service life compared to softer tyre compounds used in general-purpose tyres.
- Foam Inserts Included for Stability and Balance — Every tyre comes with foam inserts pre-installed, providing structural support and helping to maintain balance at speed. These inserts also contribute to shock absorption, giving your RC monster truck a smoother ride even when navigating rough and uneven terrain in sand or snow.
- Removable Hex System Allows Offset Changes On the Fly — The Raid 2.8" wheels feature Pro-Line's unique 6x30 interlocking hex design that can be easily swapped without removing the tyres from the wheels. This means you can switch between 12mm narrow offsets (perfect for 2WD Stampede and Rustler rear applications) and 12mm wide offsets (ideal for 2WD front and 4x4 applications) in seconds, without any gluing or permanent modification.
- Easily Replace Damaged Hexes or Upgrade to Larger Sizes — If a hex becomes damaged during intense bashing, you don't need to replace the entire expensive tyre assembly. Simply swap in a replacement hex using the included M3 hardware. Better still, you can upgrade to 14mm or 17mm hexes (sold separately) for extreme use applications, giving you a clear upgrade path as your driving evolves.
- Two Most Common Offsets Included in the Box — This package includes both the 12mm narrow offset hexes and 12mm wide offset hexes, covering the most common applications out of the box. This means you're ready to run on multiple truck configurations without needing to purchase additional adapters separately.
- Fits Any of Pro-Line's 6x30 Removable Wheel Hexes — The versatile 6x30 design means these wheels are compatible with the entire Pro-Line ecosystem of removable hexes, giving you future-proofing and flexibility. As Pro-Line expands their hex offerings, your wheels remain compatible and upgradeable.
- Raid 10-Spoke Wheel Design Mimics Full-Size Racing Wheels — The distinctive 10-spoke design isn't just for looks—it's proven full-size racing geometry that distributes loads efficiently whilst maintaining rigidity. This design provides the perfect balance between strength and lightweight performance that serious RC bashers and racers demand.
- Wheel Made from High-Strength Durable DuPont Nylon Material — The wheels are constructed from engineering-grade DuPont nylon, a material chosen for its exceptional durability and impact resistance. This premium plastic compound withstands the stresses of aggressive off-road driving, resists cracking, and maintains dimensional stability even after repeated impacts.
- M3 Wheel Hex Hardware Included — All necessary M3 x 12mm long SHCS (Socket Head Cap Screw) hardware is included in the package, with twelve screws provided to cover installation and future replacement needs. This ensures you have everything required for complete assembly and maintenance without additional purchases.
- Made in the USA Since 1982 — Pro-Line's heritage of American manufacturing and innovation is evident in every aspect of this product. Over four decades of racing pedigree means these tyres and wheels have been tested in professional racing environments and refined based on real-world feedback from elite drivers worldwide.
Technical Performance
The Dumont 2.8" tyre and wheel system represents a significant engineering achievement in RC monster truck accessory design. The tyres measure 133mm in height and 69mm in width, providing an optimal diameter and width for 1/10 scale monster trucks while maintaining the low profile needed for precise steering and handling. The paddle tread technology incorporates large offset V-shaped paddles that work in concert with the premium rubber compound to deliver maximum traction and propulsion in sand and snow environments. The foam inserts are engineered to provide consistent support throughout the tyre's height, preventing excessive deformation under load whilst maintaining the flexibility needed for shock absorption over rough terrain. The Raid 6x30 wheel design is built to withstand the extreme loads encountered during aggressive driving, with the interlocking hex system providing a secure mechanical connection that won't loosen over time. The wheels feature a 10-spoke design that distributes braking and acceleration forces efficiently, reducing stress concentration and extending component life. With dimensions of 133mm height and 69mm width, combined with the high-strength DuPont nylon construction, these wheels deliver the perfect balance of lightweight performance and durability that UK RC enthusiasts demand. The removable hex system is secured by six M3 screws spaced 30mm apart, creating a robust mounting system that accommodates multiple offset configurations without requiring any modifications to the wheel itself.
What's in the Box
- Pre-mounted Dumont 2.8" Sand/Snow Tyres on Raid Black 6x30 Removable Hex Wheels (2 pieces)
- 6x30 to 12mm Hex Adapters in Narrow offset (2 pieces)
- 6x30 to 12mm Hex Adapters in Wide offset (2 pieces)
- 6x30 to 14mm Hex Adapters (2 pieces) for ARRMA 3S Range compatibility
- M3 x 12mm long SHCS hardware (12 pieces)
Frequently Asked Questions
- What RC trucks are these Dumont tyres compatible with? — These tyres are supplied mounted on 12mm hex wheels and are compatible with any 1/10 Monster Truck featuring 12mm hexes, including the Traxxas Stampede 2WD, Traxxas Stampede 4x4, Traxxas Rustler 2WD, Traxxas Rustler 4x4, and other compatible vehicles. The package includes optional 14mm hex adapters, making them suitable for the ARRMA 3S Range when those adapters are used. Additional 17mm hex adapters are available separately from Pro-Line for other applications.
- Can I use these tyres on different offset wheels? — Yes, this is one of the key advantages of the Dumont system. The tyres come pre-mounted on Raid wheels with removable hex hubs. You receive both narrow and wide 12mm offset hexes in the box, allowing you to quickly switch between front and rear configurations or adapt to different truck platforms. The 14mm adapters included in the box enable compatibility with ARRMA vehicles, and 17mm upgrades are available separately for extreme applications.
- How do I prevent sand and mud from entering the tyre? — Pro-Line recommends placing waterproof tape, such as duct tape, over the wheel vent hole to prevent foreign materials from entering the tyre during water, mud, or sand running. If sand or mud does enter the tyre, it can cause the foam inserts to break down, making the tyre excessively heavy or unbalanced. This simple preventative measure will significantly extend the life of your tyres and maintain balanced, consistent performance.
- What makes these tyres different from general-purpose 2.8" monster truck tyres? — The Dumont tyres are specifically engineered for sand and snow environments, featuring purpose-designed paddle tread with large offset V-shaped paddles rather than the all-terrain tread patterns found on general-purpose tyres. The rubber compound is stiffer and more durable, the paddles are optimised for roosting and propulsion in loose surfaces, and the overall design delivers significantly more traction in sand and snow compared to standard monster truck tyres. If you primarily run in sand or snow, these Dumonts will deliver noticeably better performance than all-terrain alternatives.
- Are these tyres suitable for running on asphalt or concrete? — These are paddle tyres specifically designed for sand and snow. While they will function on harder surfaces, they won't provide the grip and handling characteristics you'd expect from a street or all-terrain tyre. For optimal performance and tyre longevity, use the Dumonts exclusively in sand, snow, and soft terrain environments, and switch to appropriate all-terrain or street tyres for paved driving.
- Can I replace just the hex if it gets damaged? — Yes, one of the major advantages of this system is that you can replace individual hexes without replacing the entire tyre and wheel assembly. Pro-Line sells replacement hexes (model 6335-00) separately, so if you crack or damage a hex, simply remove the six M3 screws, swap in a replacement, and you're back in action. This modularity saves money on repairs and reduces downtime.
- How do I change wheel offsets? — The process is straightforward and requires no special tools beyond a hex wrench to fit the M3 screws. Remove the six M3 x 12mm screws holding the current hex to the wheel, lift off the old hex, position the new hex (ensuring correct alignment), and reinstall the six screws. The entire process takes less than five minutes per wheel, making it quick and easy to adapt your setup to different trucks or configurations.
- What is the difference between the narrow and wide 12mm offsets? — The narrow offset is optimised for 2WD rear applications like the Stampede and Rustler, whilst the wide offset accommodates 2WD front and 4x4 front and rear positions. The width difference affects how the wheel sits relative to the truck frame, influencing handling characteristics and ensuring proper clearance. Having both options in the box means you're equipped for multiple truck configurations without additional purchases.
- Are these tyres made in the USA? — Yes, Pro-Line has been manufacturing in the USA since 1982, and the Dumont tyres are proudly made in America. This manufacturing heritage means quality control, consistency, and support from a company with decades of racing pedigree backing every product they create.
- Do I need any additional components to use these tyres? — These tyres come completely pre-mounted on wheels with all necessary hardware included. You simply need a compatible 1/10 Monster Truck and appropriate tools to install them. No additional adapters, inserts, or components are required beyond what's in the box, though you may want to consider purchasing the optional 17mm hex adapters if you plan to use these tyres on alternative platforms.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the PRO 1/10 Dumont Front/Rear 2.8 inch MT Tires Mounted 12mm Blk Raid today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
