Overview
The Axial 1/24 SCX24 Jeep JT Gladiator Brown 4WD Rock Crawler RTR is an officially licensed, ready-to-run RC car that brings the stunning 2020 North American Truck of the Year to life in exceptional scale detail. This compact yet capable mini crawler is perfect for RC enthusiasts of all skill levels, from absolute beginners discovering the world of ready to run RC vehicles, to experienced hobbyists seeking a dedicated crawling platform. Whether you're looking for a desk-bound adventure machine, an indoor obstacle course challenge, or a serious trail-ready rock crawler, this Axial SCX24 delivers outstanding performance in a size that fits anywhere.
Factory-assembled and fully equipped with everything needed to start driving immediately, the SCX24 Jeep Gladiator requires absolutely no technical knowledge or additional purchases. It arrives with a complete 2-channel radio system, brushed motor, servo, speed controller, battery, charger, and even four AA batteries for the transmitter. This is the definition of a true ready-to-run RC truck—unbox it, charge it, and drive it. The extended 22mm longer wheelbase compared to earlier SCX24 models provides superior stability and body fitment, allowing this tiny crawler to muscle over surprisingly large obstacles relative to its 1/24 scale.
Built on Axial's proven and respected SCX24 chassis platform, this Jeep Gladiator combines genuine off-road engineering with authentic scale realism. The detailed body includes a scale driver figure and a functional Tuff Stuff Overland scale accessory pack mounted to the bed rack, making this far more than just a toy—it's a scale model that actually performs like a real rock crawler. With full-time 4-wheel drive, coilover suspension, steel frame rails, and working LED headlights, this is a serious RC rock crawler experience compressed into a palm-sized package.
Key Features
- Factory-assembled and ready-to-run — Everything comes pre-assembled and tested from the factory, meaning you simply unbox the vehicle, charge the included battery, and start driving within minutes. There is no learning curve, no assembly time, and no need to purchase additional radio equipment—this complete package includes a 2-channel Horizon radio system with AA batteries already supplied, an 88T brushed motor, Axial AS-1 servo, and a Horizon ESC/receiver combo unit.
- Official Jeep JT Gladiator license — This is the authentic, officially licensed 2020 North American Truck of the Year, not a generic truck body. Every detail from the distinctive front grille and headlight design to the proportions and trim lines faithfully represents the full-size vehicle, complete with a detailed scale driver figure and functional Tuff Stuff Overland scale accessories mounted on the bed rack.
- Extended 22mm longer wheelbase — Compared to earlier SCX24 models, this Gladiator features a significantly extended wheelbase that measures 6.1 inches (155mm). This longer wheelbase dramatically improves stability during high-speed runs and gives the crawler superior ability to muscle over large obstacles, whilst also providing better body fitment and proportions for the extended Gladiator design.
- True full-time 4-wheel drive with worm gear differentials — The sophisticated drivetrain features worm drive gears in both front and rear differentials, which not only distribute power equally to all four wheels but also increase overall ground clearance—a critical advantage for rock crawling. Full-time 4WD means power is always flowing to every wheel, providing relentless traction on unpredictable terrain.
- Advanced suspension geometry optimised for crawling — The 3-link front suspension combined with a 4-link rear suspension setup is specifically engineered to reduce axle steer and torque twist, providing precise control during technical climbs. Coilover shock absorbers with simulated reservoirs deliver real suspension travel and damping performance, whilst durable composite suspension links withstand the punishment of serious crawling.
- Sturdy steel construction throughout — The chassis features stamped steel C-channel frame rails with strategic bracing for strength and proper alignment, mirroring the construction found on the larger SCX10 platform. Steel front and rear axles, steel front stub axles, and steel dogbones provide the structural integrity needed to handle tough climbs and rough trails without deflection or flex.
- LED headlights for night-time crawling — Two bright LED lights are factory-mounted in the front bumper, allowing you to drive and explore trails even in darkness or low-light conditions. Additionally, an extra LED light port on the ESC enables you to add optional LED lights for even more scale realism and functional lighting capability.
- Officially licensed Nitto Trail Grappler M/T tyres on KMC XD Machete wheels — The tyres are authentic Nitto Trail Grappler M/T—the same tread pattern found on real off-road vehicles—mounted on officially licensed KMC XD229 Machete wheels. These legendary off-road wheels feature stunning detail even at 1/24 scale and are moulded in black with a satin silver finish, providing excellent grip on both on-road and off-road surfaces.
- Full ball bearing drivetrain — Rather than using bushings that create friction and wear, the entire drivetrain spins freely on sealed cartridge ball bearings throughout the vehicle. This ensures smooth, responsive power delivery and longer component lifespan, a feature you'd expect in larger RC crawlers but rarely see at this scale.
- Hinged body system for quick battery access — The innovative hook-and-loop body hinge allows you to swing the entire body up in seconds to access the battery compartment, ESC, and chassis components. This makes changing batteries during extended sessions incredibly convenient without requiring any tools or disassembly.
- 2-year limited warranty — Axial stands behind this product with a comprehensive 2-year limited warranty, providing peace of mind with your purchase and demonstrating the manufacturer's confidence in build quality and durability.
Technical Performance
The SCX24 Jeep Gladiator is engineered around a 1/24 scale platform that combines proven crawling architecture with meticulous scale detail. Power comes from a Dynamite 88T brushed electric motor (030 size) paired with a 10-tooth pinion and 55-tooth spur gear configuration, providing appropriate torque and speed characteristics for sustained climbing and trail negotiation rather than flat-out velocity. The brushed motor design offers simplicity, reliability, and excellent low-end torque response—essential qualities for technical rock crawling where control and precise power delivery matter more than top speed. The complete drivetrain architecture includes splined drive shafts that are sleeved to allow maximum suspension travel whilst maintaining solid power connection, front and rear solid axle housings with two-piece moulded composite design, and worm gearing in the differentials that intelligently balances ground clearance with power distribution. The Horizon ESC/receiver combo unit manages all motor control and steering inputs with precision, whilst the Axial AS-1 servo provides responsive steering authority with a built-in servo saver that protects the servo gears during impacts or binding situations. The vehicle runs on a 2S LiPo battery configuration (350mAh 7.4V Dynamite battery supplied), which provides ample runtime for extended crawling sessions whilst keeping weight minimal. The sturdy construction employs stamped steel C-channel frame rails with reinforcing braces to maintain chassis integrity and alignment under load—a design principle borrowed directly from the larger SCX10 platform. Ground clearance measures approximately 1.06 inches (2.7cm), enhanced by the worm gear differential design, allowing the crawler to negotiate surprisingly challenging terrain. The water-resistant electronics ensure the vehicle can handle splashes and damp conditions without concern, making this a truly versatile ready-to-run rock crawler that performs equally well on a desk course, in a bedroom, or outdoors on genuine trail conditions.
What's in the Box
- Axial SCX24 Jeep JT Gladiator 1/24 Scale 4WD RTR (fully assembled and painted in brown)
- Horizon 2.4GHz 2-Channel Radio System with transmitter
- Axial AS-1 Servo (mounted and ready to operate)
- Horizon ESC/Receiver Combo unit (integrated speed controller and receiver)
- Dynamite 88T Brushed Electric Motor (030 size, factory installed)
- Dynamite 350mAh 2S LiPo 7.4V battery (pre-installed, ready to charge)
- USB Charger with integrated charging cable
- Four AA batteries for transmitter (inserted and ready to use)
- SCX24 Jeep JT Gladiator instruction manual in English (with German, French, and Italian language versions available)
Frequently Asked Questions
- Is the Axial SCX24 Jeep Gladiator suitable for absolute beginners with no RC experience? — Yes, absolutely. This is an ideal first ready-to-run RC vehicle because everything arrives fully assembled, tested, and ready to drive. The 2-channel radio system is intuitive to operate (forward/reverse and left/right steering), the vehicle is small enough to drive safely indoors or in confined spaces, and no technical knowledge is required. The simple brushed motor and 2-channel control scheme make it forgiving and fun to drive whilst learning basic RC vehicle operation.
- What battery does the SCX24 Jeep Gladiator need and what is the runtime? — The vehicle uses a 2S LiPo battery configuration and comes with a Dynamite 350mAh 2S LiPo 7.4V battery pre-installed. This capacity provides approximately 15-20 minutes of continuous running time depending on driving style and terrain. The included USB charger can fully recharge the battery in approximately 60-90 minutes. Additional 2S LiPo batteries are available as optional upgrades if you wish to extend your driving sessions.
- Can I upgrade the components on this ready-to-run model? — Yes, the SCX24 platform is highly modular and supported by Axial with extensive replacement parts and optional upgrades available separately. You can upgrade the motor, servo, battery, wheels and tyres, suspension components, and many other parts. The LED light port on the ESC specifically allows you to add optional LED lights beyond the two factory-mounted front headlights. Axial provides a comprehensive parts catalogue and an exploded view diagram to help you identify upgrade options.
- What is the size and weight of this crawler? — The SCX24 Jeep Gladiator measures 9.6 inches long (244mm), 3.9 inches wide (99mm), and 4.4 inches tall (112mm), with a wheelbase of 6.1 inches (155mm). It weighs just 9.45 ounces (268 grams), making it truly portable and easy to transport. Despite its compact size, the extended wheelbase provides impressive stability and crawling capability.
- Can I drive the SCX24 outdoors, or is it only for indoor use? — Whilst small enough for indoor desk courses and bedroom obstacle courses, the SCX24 Jeep Gladiator is genuinely capable of outdoor trail driving. The water-resistant electronics handle moisture and splashes without concern, the Nitto Trail Grappler M/T tyres provide genuine traction on dirt and gravel, and the sophisticated suspension easily navigates natural terrain. Many users set up outdoor crawl courses in gardens using rocks, logs, and natural obstacles—the SCX24 excels in these environments.
- What is the difference between the 1/24 SCX24 and the larger 1/10 SCX10 platforms? — The SCX24 is a quarter the linear scale of the SCX10, making it much smaller and more portable whilst sharing core design principles like steel frame rails, linked suspension, and worm gear differentials. The SCX10 offers greater scale detail and larger component options, whilst the SCX24 prioritises portability and accessibility for beginners or hobbyists wanting a genuinely capable crawler that fits anywhere. Both platforms are respected for serious rock crawling performance.
- Does this model include a charger and batteries? — Yes, everything is included. The box contains a USB charger for the LiPo battery, the pre-installed 350mAh LiPo battery ready to charge, and four AA batteries for the transmitter already installed. You need nothing else to start driving—simply charge the main battery via USB and you're ready to crawl.
- What type of terrain is this vehicle best suited for? — The SCX24 is engineered specifically for rock crawling and technical trail driving, excelling on rocky terrain, over logs and obstacles, in loose dirt and gravel, and on steep inclines. The full-time 4WD, worm gear differentials, and sophisticated suspension make it far more capable on challenging terrain than it is for flat-out speed on smooth surfaces. This is a serious crawler, not a racing vehicle.
- Are replacement parts available if something breaks? — Yes, Axial maintains comprehensive support for the SCX24 platform with replacement parts available from authorised retailers. Components like motors, servos, suspension parts, body panels, and tyres are all available separately. The shoppable exploded view diagram on the manufacturer website makes it easy to identify exact part numbers for any component.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Axial 1/24 SCX24 Jeep JT Gladiator Brown 4WD Rock Crawler RTR with LED Lights – AXI00005T1 today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Scale: 1/24
- Model Number: AXI00005T1
- Vehicle Type: Rock Crawler, Ready-to-Run (RTR)
- Make: Jeep
- Body: Officially licensed Axial Jeep JT Gladiator (Beige/Brown colour)
- Body Material: Detailed plastic with scale interior, scale driver figure, and Tuff Stuff Overland scale accessory pack
- Drive Type: 4WD (full-time all-wheel drive)
- Chassis: Stamped steel C-channel frame rails with strategic bracing
- Wheelbase: 6.1 inches (155mm) — 22mm longer than standard SCX24
- Product Length: 9.6 inches (244mm)
- Product Width: 3.9 inches (99mm)
- Product Height: 4.4 inches (112mm)
- Front Track: 3.9 inches
- Rear Track: 3.9 inches
- Product Weight: 9.45 ounces (268 grams)
- Ground Clearance: 1.06 inches (2.7cm)
- Motor Type: Brushed electric motor
- Motor: Dynamite 88T brushed electric motor (030 size)
- Pinion Gear: 10-tooth
- Spur Gear: 55-tooth
- Power Type: Electric (LiPo battery)
- Battery: Dynamite 350mAh 2S LiPo 7.4V (included, pre-installed)
- LiPo Compatibility: 2S
- Charger: USB charger (included)
- Speed Control: Horizon ESC/Receiver Combo unit (integrated speed controller and receiver)
- Servo: Axial AS-1 Servo with servo saver
- Servo Position: Mounted above front axle
- Steering Type: 2-channel steering (forward/brake/reverse and left/right)
- Radio System: Horizon 2.4GHz 2-Channel Radio System
- Radio Frequency: 2.4GHz
- Channels: 2
- Transmitter: Included with AA battery slots (4 AA batteries included)
- Suspension Front: 3-link suspension with coilover shocks
- Suspension Rear: 4-link suspension with coilover shocks
- Shock Type: Coilover shock absorbers with simulated reservoirs
- Shock Travel: 0.9-1.3 inches
- Suspension Material: Durable composite suspension links
- Differential Type: Worm gear differentials (front and rear) for increased ground clearance
- Front Differential: Worm screw and worm gear setup
- Rear Differential: Worm screw and worm gear setup
- Differential Ratio: 16T/4T
- Front Axle: Steel front and rear axles, front stub axles
- Rear Axle: Steel front and rear axles
- Drive Shafts: Splined and sleeved drive shafts (front and rear) for maximum suspension travel
- Dogbones: Steel dogbones for strength and durability
- Axle Housings: Two-piece moulded composite solid axle design (front and rear)
- Bearings: Full ball bearings throughout drivetrain (sealed cartridge bearings)
- Tyres: Officially licensed Nitto Trail Grappler M/T (factory-mounted)
- Wheels: Officially licensed KMC XD229 Machete wheels
- Wheel Finish: Moulded black with satin silver finish
- Wheel Width: 0.48 inches
- LED Lights: Two front bumper LED lights (additional LED light port on ESC for optional upgrades)
- Body Hinge: Hook-and-loop body hinge for easy battery access
- Water Resistance: Water-resistant electronics
- Assembly Level: Factory-assembled and ready-to-run (no assembly required)
- Radio Included: Yes
- Receiver Included: Yes (integrated in ESC/receiver combo)
- Servo Included: Yes
- Speed Control Included: Yes
- Motor Included: Yes
- Battery Included: Yes
- Charger Included: Yes
- Connector Type: PH 2.0 (High-Current Ultra Micro)
- Warranty: 2-year limited warranty
- Instruction Manual: Included in English, German, French, and Italian
- Replacement Parts: Available separately (Axial maintains comprehensive SCX24 parts support)
- Optional Parts: LED lights, batteries, motors, servos, suspension components, and many more available
Product Description of Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1
The Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1 is a factory-assembled, ready-to-run mini crawler that delivers scale realism and terrain-crushing capability in a compact format. Designed to replicate the award-winning 2020 Jeep Gladiator, this officially licensed crawler combines rugged performance with authentic styling. Whether you're navigating indoor crawl courses or tackling outdoor trails, the AXIAL 1/24 SCX24 Gladiator crawler with 88T brushed motor and LED lights offers a complete package for hobbyists and newcomers alike. With a detailed interior, scale driver, and Tuff Stuff Overland accessory rack, the SCX24 Jeep Gladiator mini crawler with Nitto tires and KMC Machete wheels is built to impress and perform.
Key features of the Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1
- Extended wheelbase – improves stability and obstacle handling
- Steel C-channel chassis rails – enhance structural rigidity and alignment
- LED lights – increase visibility during low-light crawling
- Coilover shocks – maintain traction across uneven terrain
- Worm gear drivetrain – boosts ground clearance and provides drag brake control
- Steel axles and splined drive shafts – deliver strength and extended suspension travel
- Hinged body system – enables fast access to electronics and battery
- Scale accessories – add realism with Tuff Stuff Overland rack and detailed interior
- Nitto tires and KMC wheels – provide trail-ready grip and authentic styling
- Full ball bearings – eliminate bushings for smoother drivetrain performance
Why is the extended wheelbase on the Axial SCX24 Gladiator brown crawler with extended wheelbase and steel chassis rails a performance advantage?
The Axial SCX24 Gladiator brown crawler with extended wheelbase and steel chassis rails features a 22mm longer wheelbase than standard SCX24 models. This extension enhances stability, especially when climbing steep inclines or navigating uneven terrain. The added length also improves body fitment, allowing the detailed Jeep JT Gladiator shell to sit naturally on the chassis. Combined with steel C-channel rails and bracing, the extended wheelbase contributes to a more planted and predictable driving experience, making it ideal for both beginners and seasoned RC enthusiasts.
How does the LED lighting system on the AXIAL 1/24 SCX24 Gladiator crawler with 88T brushed motor and LED lights improve trail visibility?
The AXIAL 1/24 SCX24 Gladiator crawler with 88T brushed motor and LED lights includes two bright LEDs mounted in the front bumper, illuminating the path ahead during low-light conditions. An additional LED port on the ESC allows users to expand the lighting setup with optional accessories. This lighting system enhances realism and functionality, enabling night-time crawling and improving obstacle awareness. Whether indoors or outdoors, the LED lights ensure that the crawler remains visible and responsive in all environments.
What makes the suspension system on the AXI00005T1 1/24 scale crawler with coilover shocks and worm gear drivetrain so effective?
The AXI00005T1 1/24 scale crawler with coilover shocks and worm gear drivetrain is equipped with a 3-link front and 4-link rear suspension setup. This geometry reduces torque twist and axle steer, ensuring consistent handling across varied terrain. The coilover shocks feature simulated reservoirs and durable composite links, delivering smooth articulation and maintaining wheel contact. The worm gear drivetrain housed in the front and rear differentials increases ground clearance and provides a natural drag brake effect, allowing the crawler to hold position on steep slopes with confidence.
Can the hinged body system on the SCX24 Jeep Gladiator RTR with scale accessories and hinged body system simplify maintenance?
Yes, the SCX24 Jeep Gladiator RTR with scale accessories and hinged body system includes a hook-and-loop hinge design that allows the body to swing open easily. This provides quick access to the battery and internal electronics without the need for tools or disassembly. The hinged system is especially useful during trail sessions, enabling fast battery swaps and adjustments. Combined with the detailed interior and scale driver, the body system balances realism with practicality, making it a standout feature for both casual and competitive users.
How do the Nitto tires and KMC wheels on the SCX24 Jeep Gladiator mini crawler with Nitto tires and KMC Machete wheels enhance performance?
The SCX24 Jeep Gladiator mini crawler with Nitto tires and KMC Machete wheels features officially licensed Nitto Trail Grappler M/T tires mounted on KMC XD229 Machete wheels. These components deliver a blend of off-road grip and on-road composure, making the crawler versatile across multiple surfaces. The tyres are molded for aggressive traction, while the wheels feature a satin silver finish and intricate detailing that enhances scale realism. This combination ensures that the crawler not only performs well but also looks the part in any setting.
Is the Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1 an affordable option for scale enthusiasts?
The Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1 arrives fully equipped with everything needed to start crawling immediately. From the pre-installed Dynamite 88T brushed motor and 350mAh LiPo battery to the USB charger and transmitter batteries, every essential component is included in the box. This makes the crawler an affordable entry point for newcomers while still delivering the performance and features that seasoned hobbyists expect. The detailed body, scale accessories, and rugged drivetrain ensure long-term value and enjoyment.
Whether you're a scale modeler or an off-road enthusiast, the Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1 offers unmatched realism, durability, and terrain capability. With its extended wheelbase, LED lighting, and officially licensed components, this crawler is ready to tackle any challenge straight out of the box. Buy Axial SCX24 Jeep Gladiator 1/24 crawler with 4WD and Tuff Stuff Overland rack today and experience the thrill of scale crawling with no assembly required.
Technical Specifications of Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1
Brand, Model and Product Type
- Brand: Axial
- Model: AXI00005T1
- Product Type: Axial SCX24 Jeep JT Gladiator 1/24 4WD rock crawler RTR brown AXI00005T1, AXIAL 1/24 SCX24 Gladiator crawler with 88T brushed motor and LED lights AXI00005T1, SCX24 Jeep Gladiator mini crawler with Nitto tires and KMC Machete wheels AXI00005T1, Axial SCX24 Gladiator brown crawler with extended wheelbase and steel chassis rails AXI00005T1, AXI00005T1 1/24 scale crawler with coilover shocks and worm gear drivetrain, SCX24 Jeep Gladiator RTR with scale accessories and hinged body system AXI00005T1
Dimensions
- Product Length: 24.4 cm – extended wheelbase improves stability and body fit
- Product Width: 9.9 cm – compact width supports tight trail navigation
- Product Height: 11.2 cm – realistic proportions with scale accessory rack
- Wheelbase: 15.5 cm – 22 mm longer than standard SCX24 for enhanced crawling ability
- Ground Clearance: 2.7 cm – increased clearance from worm gear axles
- Wheel Width: 1.2 cm – optimised for Nitto Trail Grappler M/T tyres
- Product Weight: 268 g – lightweight for responsive handling and portability
Chassis and Suspension
- Chassis Type: Stamped steel C-channel rails with bracing – adds rigidity and trail durability
- Suspension Setup: 3-link front and 4-link rear – reduces torque twist and improves axle stability
- Shock Type: Coil-over composite shocks (2.3–3.3 cm travel) – simulate reservoir design for scale realism
- Axle Design: Two-piece composite solid axle housings – engineered for strength and alignment
Drivetrain and Steering
- Drivetrain: Full-time 4WD – ensures consistent traction across all wheels
- Differential Type: Worm gear 16T/4T – increases ground clearance and provides drag brake control
- Drive Modes: Forward, brake, reverse – supports versatile terrain handling
- Steering Type: 2-wheel steering – controlled via AS-1 servo with built-in servo saver
- Drive Shafts: Splined and sleeved – supports full suspension travel while maintaining power delivery
- Axles: Steel front and rear – includes stub axles and dogbones for durability
Motor and Electronics
- Motor Type: Dynamite 88T brushed – delivers torque for steep climbs and technical crawling
- Motor Mount: Steel – minimises flex and protects gear mesh integrity
- ESC/Receiver: Horizon 2-in-1 combo – compact layout for simplified wiring
- Radio System: Horizon 2.4GHz 2-channel – includes AA batteries for transmitter
- Battery: Dynamite 350mAh 2S 7.4V LiPo – rechargeable and sized for micro crawler runtime
- Charger: USB – convenient charging via standard USB ports
- Connector Type: PH 2.0 high-current ultra micro – compatible with included battery and charger
Lighting and Body
- LED Lights: Two front bumper LEDs included – extra port available for optional expansion
- Body: Officially licensed Jeep JT Gladiator – includes scale driver and Tuff Stuff Overland rack
- Body Access: Hinged hook-and-loop system – allows fast access to chassis and battery
Tyres and Wheels
- Tyre Type: Nitto Trail Grappler M/T – blend of off-road grip and on-road composure
- Wheel Type: KMC XD229 Machete – satin silver finish with detailed styling
Build and Materials
- Frame: Steel C-channel rails – reinforced with bracing for alignment and strength
- Ball Bearings: Full set – eliminates bushings for smoother drivetrain performance
- Suspension Links: Durable composite – supports articulation and shock absorption
What’s in the Box
- Axial SCX24 Jeep JT Gladiator 1/24 Scale 4WD RTR
- Horizon 2.4GHz 2-Channel Radio System
- Axial AS-1 Servo
- Horizon ESC/Receiver Combo
- USB Charger
- Dynamite 88T Brushed Electric Motor
- Dynamite 350mAh 2S 7.4V LiPo Battery
- 4 x AA Transmitter Batteries
- Instruction Manual
What You Will Need
- No additional items required – fully equipped and ready-to-run
Sold Separately
- Optional upgrade parts – LED expansion kits, aluminium components, and custom body accessories
Warranty
- Warranty Duration: 1 year – covers defects in materials and workmanship
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
