Overview
The Traxxas 24-T Pinion Gear (1.0 metric pitch) Set (fits 5mm shaft) TRX6496X is an essential replacement or upgrade component for serious RC enthusiasts running some of Traxxas's most powerful and demanding brushless RC vehicles. Whether you own an 8S brushless monster truck, a high-performance short course truck, or an aggressive bashing rig, this pinion gear delivers the precision engineering and reliability that Traxxas is renowned for across the RC car UK hobby community. This 24-tooth pinion gear is engineered to mesh perfectly with steel spur gears and is designed to handle the immense torque and rotational forces generated by modern brushless motors, making it an ideal choice for both competitive racers and weekend bashers alike.
As an OEM Traxxas component, this pinion gear represents genuine factory engineering and quality control standards. The ready-to-run RC vehicles that use this component are capable of reaching speeds in excess of 50 mph with 8S brushless power systems, and this gear must perform reliably under extreme conditions. Upgrading or replacing your pinion gear with genuine Traxxas parts ensures you maintain the performance characteristics your vehicle was engineered to deliver. This is not an aftermarket compromise—it is the genuine article that Traxxas designers specified for their most advanced platforms.
The 1.0 metric pitch specification ensures compatibility with the correct spur gears, and the 5mm shaft bore means this gear will fit securely on the motor shafts of compatible Traxxas vehicles without wobble or slippage.
Key Features
- 24-Tooth Count — The tooth count directly affects your vehicle's gearing ratio and performance characteristics; this 24-tooth configuration is engineered for vehicles requiring this specific reduction ratio to balance top speed and acceleration with the power output of 8S brushless systems.
- 1.0 Metric Pitch (Mod 1) — Metric pitch gearing ensures precise tooth engagement with compatible steel spur gears, delivering smooth power transfer and minimising gear noise and wear during high-speed runs and aggressive off-road bashing.
- 5mm Shaft Bore — The standardised 5mm shaft diameter is the specification for the latest generation of Traxxas brushless RC cars, ensuring a perfect fit on motor shafts without modification or adapters.
- Genuine Traxxas OEM Component — This is not an aftermarket equivalent; it is the factory pinion gear specified by Traxxas engineers for their most advanced vehicles, guaranteeing compatibility and performance consistency.
- Steel Spur Gear Compatible — This pinion gear is specifically designed to mesh with steel spur gears commonly found in Traxxas transmission systems, ensuring optimal engagement and durability under load.
- Precision Engineering — Manufactured to exacting tolerances, this gear maintains consistent tooth profile and bore diameter, essential for reliable operation at high RPM in brushless RC vehicles capable of 50+ mph performance.
Technical Performance
The Traxxas 24-T Pinion Gear represents precision gear manufacturing engineered for the demands of modern brushless RC cars running 8S lithium polymer battery systems. With a 24-tooth configuration and 1.0 metric pitch specification, this gear is engineered to deliver smooth power transfer and predictable gearing ratios in high-performance Traxxas vehicles. The 5mm shaft bore ensures secure mounting on contemporary Traxxas motor shafts, eliminating the play that can develop with worn or incorrect-diameter gears. Designed for compatibility with steel spur gears, this pinion gear can handle the continuous rotational forces and torque multiplication of vehicles capable of reaching speeds exceeding 50 mph with brushless power systems. The precision teeth profile ensures engagement remains consistent across the full range of operating conditions, from initial acceleration through sustained high-speed running. Whether you are replacing a worn original gear or optimising your vehicle's drivetrain performance, this genuine Traxxas component maintains the engineering standards and reliability the brand is known for throughout the UK RC hobby.
What's in the Box
- Traxxas 24-T Pinion Gear with 5mm bore
Frequently Asked Questions
- What vehicles is this 24-tooth pinion gear compatible with? — This pinion gear is compatible with multiple high-performance Traxxas brushless models including the X-Maxx Belted 4WD Brushless 8S Monster Truck (available in orange, blue, red, and green), the X-Maxx Ultimate variants (available in blue and green), the XRT VXL-8S (available in green, black, blue, and orange), the XRT Ultimate variants (available in blue and green), the Maxx Slash 1/8 4WD 6S Brushless Short Course Truck (available in red, green, rock n roll, and blue), and the WideMaxx Monster Truck (available in red, rock n roll, and green). If you own any of these vehicles, this is the genuine replacement or upgrade pinion gear specified by the manufacturer.
- Why would I need to replace my pinion gear? — Pinion gears wear over time through normal operation, especially in brushless RC vehicles running 8S power systems where motor RPM and drivetrain stresses are extreme. Worn gears exhibit tooth degradation, which causes increased noise, vibration, power loss, and potential drivetrain failure. Upgrading to genuine Traxxas components ensures you restore or upgrade your vehicle's gearing performance and reliability.
- Is this suitable for both racing and bashing? — Yes, this pinion gear is utilised in the most demanding Traxxas vehicles, which are equally at home in competitive racing environments and aggressive off-road bashing scenarios. The robust construction and precision engineering support both use cases equally well.
- What is the difference between a 24-tooth and other tooth counts? — The number of teeth directly affects your vehicle's gearing ratio and performance characteristics. A 24-tooth pinion is engineered for specific spur gear combinations found in your vehicle, and choosing the correct tooth count ensures your vehicle delivers the manufacturer's intended balance between top speed and acceleration. Using an incorrect tooth count can result in poor performance, reduced battery efficiency, or drivetrain strain.
- How do I know if I need a new pinion gear? — Signs of a worn pinion gear include unusual grinding or whining noises from the drivetrain, increased vibration during operation, reduced acceleration despite charged batteries, or visible tooth damage when you inspect the gear. If you notice any of these symptoms in your Traxxas RC car UK hobby vehicle, it is time to upgrade to a new genuine component.
Why Buy from RC Model Shop?
RC Model Shop is a trusted UK RC retailer and authorised dealer for all the brands we stock, including Traxxas, ARRMA, Losi, FTX, Hobbywing, Spektrum and more. Based in Walsall, we have a physical store where customers are welcome to come in, view products and purchase in store. Whether you are a seasoned competitor, a weekend basher, or just discovering the world of RC for the first time, our team of experienced RC enthusiasts is here to help you find the perfect setup and provide ongoing support. Order the Traxxas 24-T Pinion Gear (1.0 metric pitch) Set (fits 5mm shaft) TRX6496X today with confidence, knowing you are buying from an authorised retailer with genuine products, expert knowledge and a commitment to customer satisfaction. Shop online or visit us in Walsall — we look forward to helping you get the most out of your RC experience.
- Brand: Traxxas
- Model Number: TRX6496X
- EAN: 0020334649690
- Pinion Gear Tooth Count: 24
- Gear Pitch: Mod 1 (1.0 metric pitch)
- Shaft Bore Diameter: 5mm
- Compatible with: Steel Spur Gears
- Compatible Vehicles: Traxxas X-Maxx Belted 4WD Brushless RTR 8S Monster Truck, Traxxas X-Maxx Ultimate, Traxxas XRT VXL-8S, Traxxas XRT Ultimate, Traxxas Maxx Slash 1/8 4WD 6S Brushless Short Course Truck, Traxxas WideMaxx Monster Truck
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
